GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Archive Screen
{SAVE PASSWORD} Allows you to save the application password to floppy disk. When you
press the {SAVE PASSW} softkey, you will be prompted to insert a formatted floppy disk in the
disk drive and to press the {SAVE} softkey on the Password LCD Menu. For information on
formatting a floppy disk, refer to Formatting a Floppy Disk.
{ENTER PASSWORD} Entering the password enables application software. A registration
form is included with the application software. Complete this including your console serial
number and fax it to the Software Registration Centre at Strand Lighting UK, who will verify it
and issue your password.
To find the console serial number, press [REPORT] and look at the CONS field in the System
Report Screen Configuration window.
This password is unique to your console with its application software and is not transferable.
Keep a record of your password. If you change the password for additional application
software, entering the old password will revert to the previous configuration.
{ENTER PASSW} lets you enter the password. If you are not already in the Software menu,
press [ARCHIVE] {SOFT}.
Type in the supplied password number with no spaces or other keys then press [*]. If the
password is entered incorrectly a Password 'Please Re-enter' message appears. To cancel the
operation, press {BACK} .
Once entered, the password cannot be displayed again.
Note: A new password is sometimes rejected with incorrect ILLEGAL CONSOLE error. If this
happens, press the [*] key before entering the password digits.
Loading Software
The operating software is pre-loaded at manufacture. You will need to update this software if
new versions are released. For further information on how to load the operating software refer
to Loading Software.
The OS field in the System Report Screen Configuration window shows the operating software
that is currently loaded on the console. To show this field, press [REPORT].
Note: Show files from version 2.4 software cannot be loaded into previous software versions.
You must load this version of software into the console before loading the show.
file:///C|/LIGHTP/HELP.ENG/page27.htm (6 of 19)11/2/2004 3:03:02 AM