GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Channel levels, attributes and Dimmers QR
[SHIFT] [+] [SHIFT] [+]
Toggle off: All soloed
IntChans go unsoloed
(all keys re-enabled)
[SHIFT] [*] [SHIFT] [*] Repeats Last Command
[1] {FLASH^} [1] {FLASH^}
IntChan 1 is flashed to
Flash Supermaster level
until key is released
[1] [SHIFT] {FLASH^} [1] [SHIFT] {FLASH^}
IntChan 1 is flashed to
0% until key released
[CUE] [1] [@] [2] [CUE] [1] [@] [2] [0]
IntChans from cue 1 at
20% of recorded levels
plus recorded AttChans
IntChans from cue 1 at
[CUE] [1] [@] [+] [2] [CUE] [1] [@] [+] [2] [0] 120% of recorded levels
plus recorded AttChans
[CUE] [@] [-] [2] [CUE] [@] [-] [2] [0]
IntChans from current
cue at 80% of recorded
levels plus recorded
AttChans
[1] [+] [CUE] [1] [@] [2]
[CUE] [1] [@] [FULL]
or
[CUE] [1] [@] [SHIFT]
[ON]
[1] [+] [CUE] [1]
[@] [2] [0]
[CUE] [1] [@] [FULL]
or
[CUE] [1] [@] [SHIFT]
[ON]
IntChans from cue 1 at
20% of recorded levels,
plus recorded AttChans,
plus IntChan 1 at 20%,
whether or not it is used
in cue 1.
IntChans from cue 1 to
their recorded levels plus
recorded AttChans
[CUE] [1] [THRU] [2]
[@] [FULL]
[CUE] [1] [THRU] [2]
[@] [FULL]
[CUE] [1] [@] [*] [CUE] [1] [@] [*]
[CUE] [1] [@]
{INTS ONLY} {FULL}
[CUE] [1] [@]
{INTS ONLY} {FULL}
HTP sum of recorded
IntChans from cues 1
and 2 and LTP sets of
AttChans
IntChans from cue 1 go
to off
IntChans from cue 1 at
recorded levels
[1] [@] [GROUP] [9]
{INTS ONLY} [*]
[1] [@] [GROUP] [9]
{INTS ONLY} [*]
Link IntChan 1 to group
9 (Groups 1 to 750)
file:///C|/LIGHTP/HELP.ENG/page56.htm (3 of 10)11/2/2004 3:03:30 AM