GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Effects (Command Line Mode)
[FX] [1] [.] [2] [TIME]
{STEP I/D/O} [/] {OFF/MAN} [*]
[FX] [1] [.] [2] [@ATT] [TIME] [*]
[FX] [1] [.] [2] [@ATT] [TIME] [3] [*]
[FX] [1] [.] [2] {LO/HI LEVEL} [*]
[FX] [1] [.] [2] {LO/HI LEVEL} [4] [*]
[FX] [1] [.] [2] {LO/HI LEVEL} [4] [/]
[8] [*]
[FX] [1] [.] [2] {LO/HI LEVEL}
[/] [1] [0] [0] [*]
Sets FX 1 step fade times for step 2
to dwell = OFF
Sets FX 1 overall attribute fade in
time for step 2 to 0s
Sets FX 1 overall attribute fade in
time for step 2 to 3s
Sets FX 1 low and high levels for
step 2 to 0% and 100%
Sets FX 1 low level only for step 2 to
40%
Sets FX 1 low and high levels for
step 2 to 40% and 80%
Sets FX 1 high level only for step 2 to
100%
Note: The Effect Mode field on all consoles
and actions caused by key sequences
indicated with ** (300 Series Consoles) can
only be can only be changed using the
trackball to select the field and the level wheel
or [+] or [-] keys to select the option.
Copying Levels from an Effect Step (Command Line Mode)
Key Sequence Action
[RECORD] [SUB] [2] [*]
Records levels in current effect step
to submaster 2
[RECORD] [CUE] [4] [*]
Records levels in current effect step
to cue 4
[RECORD] [FX] [3] [.] [4] [*]
Records levels in current effect step
to effect 3 step 4
Using the Effect Playbacks (Command Line Mode)
The following Command Line syntax examples are normally used with Lightpalette
file:///C|/LIGHTP/HELP.ENG/page62.htm (5 of 9)11/2/2004 3:03:32 AM