GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Channel levels, attributes and Dimmers QR
[1] [@] {COPYFROM}
[2] [*]
[1] [@] {COPYFROM}
{DMX}
[1] [@]
[Q ONLY/TRACK] [2]
[1] [@] {COPYFROM}
[2] [*]
[1] [@] {COPYFROM}
{DMX}
[1] [@]
[Q ONLY/TRACK]
[2] [0]
Copy channel 2 levels to
channel 1, or to a list of
channels if specified
Copy DMX In channel 1
level to channel 1, or
copy a list of channels if
specified, or copy the
current selection
channels, or copy all 512
DMX In channels if no
selection
1 to 20%, for this cue
only (only valid at cue
sheet in track mode).
Q ONLY/TRACK is valid
in any @ command.
[1] [@] [+] [2] [1] [@] [+] [2] [0] 1 up by 20% absolute
[1] [@] [-] [1] [.] [1] [1] [@] [-] [1] [1] 1 down by 11% absolute
[1] [ON]
[1] [@] [ON]
[1] [ON]
[1] [@] [ON]
Select IntChan 1, set to
On Level % set in User
Setup
[3] {FULL}
[3] [SHIFT] [ON]
[3] [@] {FULL}
[3] [@] [SHIFT] [ON]
[1] [REMDIM]
[1] [SHIFT] [-]
[REMDIM] [REMDIM]
[3] {FULL}
[3] [SHIFT] [ON]
[3] [@] {FULL}
[3] [@] [SHIFT] [ON]
[1] [REMDIM]
[1] [SHIFT] [-]
[REMDIM] [REMDIM]
[1] {BUMP} [1] {BUMP}
[1] [SHIFT] [+] [1] [SHIFT] [+]
Select IntChan 3, set to
100%
All IntChans except 1
are set to off.
If 1 is off, it is set to ON
level.
If no selection, all
IntChans are set to OFF.
According to BUMP
MODE key: IntChan 1 is
soloed (most keys now
locked out) or flashed to
Flash Supermaster level,
or both, until key
released
Toggle on: IntChan 1 is
soloed (most keys now
locked out)
file:///C|/LIGHTP/HELP.ENG/page56.htm (2 of 10)11/2/2004 3:03:30 AM