GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Report Displays
Console Mode:
Printer:
Show Files: Access to show files on the local console or on the file server. Individual rights
can be set for local and server files. YES or NO.
Channel/Dimmer Controls: Access to change the channel levels and dimmer controls. YES
or NO
Playbacks: Access to run the X Playbacks YES or NO
Console Access Rights
This window allows the Admin User to check the access rights of the logged on user to operate
the consoles on the network. By selecting the consoles on the network using the Console field,
the Admin User can set the access rights for various aspects of the system, as described
above, for each console on the network. If access rights for particular aspects of the system
have been set to NO, the Admin User cannot permit access to this function on any of the
consoles on the network.
While a user may have access to all aspects of the lighting system, the Admin User can restrict
the access rights to particular consoles within the network.
Combined User and Console Access Rights
This window allows the Admin User to check the access rights of the logged on user to use the
various control aspects of each console on the network. By selecting the console on the
Console Field of the Console Access Rights window, the access permitted by the combination
of User Access Rights and Console Access Rights is shown on the Combined User and
Console Access Rights window.
Selecting the {ACCESS RIGHT} softkey displays a {MEMORY LOCK} softkey and a {BACK}
softkey to return to the previous LCD display. For further information on locking the console
memory see below.
The System Diagnostics Menu
Pressing the {SYSTEM DIAG} softkey from the System Report LCD menu, provides access to
the Status Log, the Network Diagnostic display and the Internal Diagnostic display. A {BACK}
softkey returns to the previous LCD menu. These screens are intended for use by a technician
file:///C|/LIGHTP/HELP.ENG/page46.htm (12 of 17)11/2/2004 3:03:04 AM