GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters
the bump button is pressed again.
{KEYS ON} While the bump button is pressed, the channel levels are bumped. Releasing the bump
button releases the bump.
{KEYS OFF} The bump buttons are disabled.
Text Labels
You can record a text label (caption) with each submaster to help identify the submaster. The
submaster text label is entered using the external keypad.
[SUB] # [TEXT] text [RECORD] records levels on the current display into the specified
submaster and assigns a text label (caption) to it.
[SUB] # [TEXT] text [*] changes the text label (caption) assigned to a submaster without
changing recorded levels.
For examples, refer to Recording Levels and Properties in Basic Recording.
Updating and Adding to Submasters
[UPDATE] [SUB] # [*] changes levels in the specified submaster as necessary based
on channels that have been modified live (red or purple channels on the Live display).
This command excludes channels that are not already in the submaster, and channels
that have been removed from the modified list by using [SHIFT] [CLR].
Note: When using submasters the [UPDATE] key is set to default to update only
channels already in the submaster. Pressing the [UPDATE] key as part of a submaster
command syntax, e.g., [UPDATE] [SUB] # [*] is the same as entering [UPDATE]
{CHANS IN} [SUB] # [*]. So when updating a submaster to include only changes in
channels already inthe submaster, there is no need to use the {CHANS IN} softkey. The
{CHANS IN} softkey is used, as necessary, when updating cues.
Channels that are off in the selection will be removed from the submaster.
[UPDATE] [SUB] [1] [*] (All Modes)
Updates levels that have been modified in submaster 1, excluding levels of
file:///C|/LIGHTP/HELP.ENG/page24.htm (12 of 25)11/2/2004 3:02:50 AM