GeniusPro/Lightpalette Operator's Manual - Strand Lighting

More documents

Recommendations

Info

Channel levels, attributes and Dimmers QR [SHIFT] [+] [SHIFT] [+] Toggle off: All soloed IntChans go unsoloed (all keys re-enabled) [SHIFT] [*] [SHIFT] [*] Repeats Last Command [1] {FLASH^} [1] {FLASH^} IntChan 1 is flashed to Flash Supermaster level until key is released [1] [SHIFT] {FLASH^} [1] [SHIFT] {FLASH^} IntChan 1 is flashed to 0% until key released [CUE] [1] [@] [2] [CUE] [1] [@] [2] [0] IntChans from cue 1 at 20% of recorded levels plus recorded AttChans IntChans from cue 1 at [CUE] [1] [@] [+] [2] [CUE] [1] [@] [+] [2] [0] 120% of recorded levels plus recorded AttChans [CUE] [@] [-] [2] [CUE] [@] [-] [2] [0] IntChans from current cue at 80% of recorded levels plus recorded AttChans [1] [+] [CUE] [1] [@] [2] [CUE] [1] [@] [FULL] or [CUE] [1] [@] [SHIFT] [ON] [1] [+] [CUE] [1] [@] [2] [0] [CUE] [1] [@] [FULL] or [CUE] [1] [@] [SHIFT] [ON] IntChans from cue 1 at 20% of recorded levels, plus recorded AttChans, plus IntChan 1 at 20%, whether or not it is used in cue 1. IntChans from cue 1 to their recorded levels plus recorded AttChans [CUE] [1] [THRU] [2] [@] [FULL] [CUE] [1] [THRU] [2] [@] [FULL] [CUE] [1] [@] [*] [CUE] [1] [@] [*] [CUE] [1] [@] {INTS ONLY} {FULL} [CUE] [1] [@] {INTS ONLY} {FULL} HTP sum of recorded IntChans from cues 1 and 2 and LTP sets of AttChans IntChans from cue 1 go to off IntChans from cue 1 at recorded levels [1] [@] [GROUP] [9] {INTS ONLY} [*] [1] [@] [GROUP] [9] {INTS ONLY} [*] Link IntChan 1 to group 9 (Groups 1 to 750) file:///C|/LIGHTP/HELP.ENG/page56.htm (3 of 10)11/2/2004 3:03:30 AM
Channel levels, attributes and Dimmers QR [1] [@] [TEXT] hello [TEXT] {INTS ONLY} [*] [1] [@] [GROUP] [TEXT] hello [TEXT] {INTS ONLY} [*] [1] [@] {COPYFROM} [GROUP] [9] {INTS ONLY} [*] [1] [@] [TEXT] hello [TEXT] {INTS ONLY} [*] [1] [@] [GROUP] [TEXT] hello [TEXT] {INTS ONLY} [*] [1] [@] {COPYFROM} [GROUP] [9] {INTS ONLY} [*] Link IntChan 1 to group with text label 'hello' (Groups 1 to 750) Link IntChan 1 to group with text label 'hello' (Groups 1 to 750) Copy IntChan 1 from group 9 [1] [@] {COPYFROM} [TEXT] hello [TEXT] {INTS ONLY} [*] [1] [@] {COPYFROM} [GROUP] [TEXT] hello [TEXT] {INTS ONLY} [*] [1] [THRU] [5] [@] {INTS ONLY} [GROUP] [2] [*] [CUE] [1] [*] [SUB] [1] [*] [GROUP] [1] [*] [CUE] [1] wheel [CUE] [+] [1] wheel [CUE] [-] [1] wheel [+] [1] [+] [1] [-] [1] [-] [1] [1] [@] {COPYFROM} [TEXT] hello [TEXT] {INTS ONLY} [*] [1] [@] {COPYFROM} [GROUP] [TEXT] hello [TEXT] {INTS ONLY} [*] [1] [THRU] [5] [@] {INTS ONLY} [GROUP] [2] [*] [CUE] [1] [*] [SUB] [1] [*] [GROUP] [1] [*] [CUE] [1] wheel [CUE] [+] [1] wheel [CUE] [-] [1] wheel Copy IntChan 1 from group with text label 'hello' (Groups 1 to 750) Copy IntChan 1 from group with text label 'hello' (Groups 1 to 750) Chans 1 > 5 Ints only copied from group 2 Select IntChans from cue 1 (sub 1 or group 1) at current levels IntChans from cue 1 are wheeled using wheel mode from current levels to recorded levels, recorded fade type IntChans in cue 1 are wheeled from current levels to levels recorded in cue 1, as a move fade (dim fade) IntChans in cue 1 are wheeled from current levels to zero. Add channel 1 to current selection Remove channel 1 from current selection [1] [HOLD] [1] [HOLD] Holds channel 1 [1] [SHIFT] [HOLD] [1] [SHIFT] [HOLD] Un-holds channel 1 file:///C|/LIGHTP/HELP.ENG/page56.htm (4 of 10)11/2/2004 3:03:30 AM
Page 1 and 2:
GeniusPro/Lightpalette Operator's M
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Front - Always display the channel
Page 15 and 16:
Front - Consoles that have no Grand
Page 17 and 18:
Front Additional software features
Page 19 and 20:
Front - PS/2 mouse support added fo
Page 21 and 22:
Front - On output when updating (wi
Page 23 and 24:
Front Brain slot 2 is labelled U44.
Page 25 and 26:
510i Show Controller The 510 i and
Page 27 and 28:
510i Show Controller Macro Display
Page 29 and 30:
510i Show Controller until the requ
Page 31 and 32:
510i Show Controller {+SS} Add one
Page 33 and 34:
510i Show Controller {SHUTDOWN} Dis
Page 35 and 36:
CommuniquePro2 CommuniquéPro (Cont
Page 37 and 38:
CommuniquePro2 Note: You can test t
Page 39 and 40:
CommuniquePro2 0xF8 (MIDI key type
Page 41 and 42:
CommuniquePro2 The following softke
Page 43 and 44:
CommuniquePro2 [CLR] Cancels time e
Page 45 and 46:
CommuniquePro2 enabled in Show Setu
Page 47 and 48:
CommuniquePro2 disabled, the prior
Page 49 and 50:
CommuniquéPro To set up External S
Page 51 and 52:
CommuniquéPro 1. Use the trackball
Page 53 and 54:
CommuniquéPro Tel: 818/598-0088 Fa
Page 55 and 56:
CommuniquéPro channels. The Notes
Page 57 and 58:
CommuniquéPro Bn 11 27 31 xx Reser
Page 59 and 60:
CommuniquéPro 71 AB_MAN_TIME 72 RA
Page 61 and 62:
CommuniquéPro 7F BLOCK KS-Key/KS-K
Page 63 and 64:
CommuniquéPro 07 DELETE_SHOW 08 PR
Page 65 and 66:
CommuniquéPro 15 PAUSE 16 EXIT_RES
Page 67 and 68:
CommuniquéPro Pressure/Pitch Bend:
Page 69 and 70:
CommuniquéPro CommuniquéPro also
Page 71 and 72:
Console Connectors www ● Sbus 1-4
Page 73 and 74:
Console Connectors Pin 4 Remote inp
Page 75 and 76:
Console Connectors Pin 3 Analog Blu
Page 77 and 78:
Console Connectors Sub 25-36 macros
Page 79 and 80:
Console Connectors Pin 1 Carrier De
Page 81 and 82:
Console Connectors Pin 7 GND Pin 8
Page 83 and 84:
Console Connectors Pin 5 Signal Gro
Page 85 and 86:
Console Setup The Console Setup Scr
Page 87 and 88:
Console Setup information refer to
Page 89 and 90:
Console Setup For information on th
Page 91 and 92:
Console Setup applied to compensate
Page 93 and 94:
Networker Software the RJ-45 port (
Page 95 and 96:
Networker Software # # Configures t
Page 97 and 98:
Networker Software DMX PRIORITY ON
Page 99 and 100:
Networker Software console_addr IP
Page 101 and 102:
Networker Software Preserving Confi
Page 103 and 104:
Networker Software Tracking Backup
Page 105 and 106:
Networker Software on_line = 1 back
Page 107 and 108:
Networker Software Sync Connect To
Page 109 and 110:
Networker Software state being tran
Page 111 and 112:
Networker Software Ensure that the
Page 113 and 114:
Networker Software Supermasters sha
Page 115 and 116:
Show Setup Screen Show Setup Screen
Page 117 and 118:
Show Setup Screen recorded and run.
Page 119 and 120:
Show Setup Screen Power Up Macro Se
Page 121 and 122:
Show Setup Screen The Patch Window
Page 123 and 124:
Show Setup Screen time, and stop da
Page 125 and 126:
Recording Cues Recording Cues see a
Page 127 and 128:
Recording Cues ● ● ● ● ●
Page 129 and 130:
Recording Cues you the chance to ca
Page 131 and 132:
Recording Cues down delay time is s
Page 133 and 134:
Recording Cues cue [PROFILE] # [*]
Page 135 and 136:
Recording Cues Deletes the fade pro
Page 137 and 138:
Recording Cues loops, and subroutin
Page 139 and 140:
Recording Cues 7, 8, 9, 6, 7, 8, 9,
Page 141 and 142:
Recording Cues Move Fades (MF): - G
Page 143 and 144:
Recording Cues [CUE] [2] [6] [*] [*
Page 145 and 146:
Recording Cues Creates a new cue nu
Page 147 and 148:
Running Cues Running Cues see also:
Page 149 and 150:
Running Cues The Blackout Cue The f
Page 151 and 152:
Running Cues Profile F # Start the
Page 153 and 154:
Running Cues If there are any stopp
Page 155 and 156:
Running Cues Changing Cue Direction
Page 157 and 158:
Running Cues fade rate, or both. Wh
Page 159 and 160:
Running Cues Note: The [UPDATE] com
Page 161 and 162:
Running Cues thereby disrupting the
Page 163 and 164:
Running Cues To go directly to a cu
Page 165 and 166:
Running Cues Cue Preview Screen - S
Page 167 and 168:
Running Cues Cue XRef Screen - Ligh
Page 169 and 170:
Running Cues Creating a New Cue To
Page 171 and 172:
Running Cues Renumbering changes th
Page 173 and 174:
X Playbacks In multi-part cues, onl
Page 175 and 176:
X Playbacks This window is mainly u
Page 177 and 178:
X Playbacks The playbacks can be us
Page 179 and 180:
User Setup User Setup Screen This d
Page 181 and 182:
User Setup [1][@][4][.][5] sets cha
Page 183 and 184:
User Setup ■ ■ ■ ■ ■ ■
Page 185 and 186:
User Setup GEMINI: Row order, 10 ch
Page 187 and 188:
User Setup LP+ : Row order, 20 chan
Page 189 and 190:
User Setup GENIUS+ (GeniusPro Defau
Page 191 and 192:
User Setup PRESET: Shows the name o
Page 193 and 194:
User Setup Channel Formatting Contr
Page 195 and 196:
User Setup complete is shown to the
Page 197 and 198:
User Setup Undo Time The time for a
Page 199 and 200:
User Setup Mouse If a mouse is inst
Page 201 and 202:
User Setup Screen Locking the Conso
Page 203 and 204:
Groups ❍ Group 998.3 - *Partition
Page 205 and 206:
Groups Recording Group Levels [GROU
Page 207 and 208:
Groups Updates levels that have bee
Page 209 and 210:
Groups Group Screen - GeniusPro fil
Page 211 and 212:
Groups [UNDO] to cancel the command
Page 213 and 214:
Working with Channel Levels Working
Page 215 and 216:
Working with Channel Levels The lay
Page 217 and 218:
Working with Channel Levels ● cya
Page 219 and 220:
Working with Channel Levels ● ●
Page 221 and 222:
Working with Channel Levels Setting
Page 223 and 224:
Working with Channel Levels chans [
Page 225 and 226:
Working with Channel Levels file://
Page 227 and 228:
Working with Channel Levels (Cont)
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Tracker Software Tracker Software T
Page 239 and 240:
Tracker Software Places channel 1 a
Page 241 and 242:
Tracker Software ● ● ● ●
Page 243 and 244:
Tracker Software The Rotary Control
Page 245 and 246:
Tracker Software Copying Channel At
Page 247 and 248:
Tracker Software The Copy Patch Men
Page 249 and 250:
Tracker Software [1] {MOVE PATCH} [
Page 251 and 252:
Tracker Software From the Patch Dis
Page 253 and 254:
Tracker Software For an attribute t
Page 255 and 256:
Tracker Software To edit the ATC Pa
Page 257 and 258:
Product Specification Product Speci
Page 259 and 260:
Product Specification ● Cue P/Bac
Page 261 and 262:
Product Specification ● Cues = 60
Page 263 and 264:
Product Specification ● Attribute
Page 265 and 266:
Product Specification *** The maxim
Page 267 and 268:
Basic Recording Basic Recording Cue
Page 269 and 270:
Basic Recording Note: When recordin
Page 271 and 272:
Basic Recording assigned time, omit
Page 273 and 274:
Basic Recording Note: The [REC TIME
Page 275 and 276:
Basic Recording You can record subm
Page 277 and 278:
Submasters numbering of the fader p
Page 279 and 280:
Submasters ❍ ❍ ❍ ❍ ❍ ❍
Page 281 and 282:
Submasters ● Text These propertie
Page 283 and 284:
Submasters submasters can be contro
Page 285 and 286:
Submasters [SUB] [1] [FX] [2] [*] (
Page 287 and 288:
Submasters the bump button is press
Page 289 and 290:
Submasters Updating Submasters from
Page 291 and 292:
Submasters The Submasters window in
Page 293 and 294:
Submasters The Submaster Screen To
Page 295 and 296:
Submasters OFF if no effect is asso
Page 297 and 298:
Submasters submaster 1 into page 3
Page 299 and 300:
Submasters Two-Scene Preset When se
Page 301 and 302:
General Introduction Introduction T
Page 303 and 304:
General Introduction Console Differ
Page 305 and 306:
General Introduction 520 Series Dif
Page 307 and 308:
General Introduction Conventions Us
Page 309 and 310:
General Introduction and for the pu
Page 311 and 312:
General Introduction and its suppli
Page 313 and 314:
Loading Software Loading Software Y
Page 315 and 316:
Loading Software stored in a safe p
Page 317 and 318:
Loading Software See also Installin
Page 319 and 320:
Networker for SN10X Software Instal
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Additional Information hostname = a
Page 327 and 328:
Additional Information FIXTURE.BAK
Page 329 and 330:
Additional Information DOS Environm
Page 331 and 332:
Additional Information Russia: c:\d
Page 333 and 334:
PC Software Offline Editor & PC Sof
Page 335 and 336:
PC Software standard PC network. Th
Page 337 and 338:
PC Software rename the shortcut to
Page 339 and 340:
PC Software B Backup PC O Offline E
Page 341 and 342:
PC Software 5 500 Series B Backup P
Page 343 and 344:
PC Software pressing . 7. The Stran
Page 345 and 346:
PC Software you insufficient memory
Page 347 and 348:
PC Software Next N Last L Thru > Th
Page 349 and 350:
PC Software Exit Program crtl X P K
Page 351 and 352:
Showport File Conversion cd c:\show
Page 353 and 354:
Showport File Conversion $$LoopCoun
Page 355 and 356:
Showport File Conversion ● ●
Page 357 and 358:
Shownet Configuration Software 1. I
Page 359 and 360:
Shownet Configuration Software Cut
Page 361 and 362:
Shownet Configuration Software Down
Page 363 and 364:
Server Software place. 3. Insert a
Page 365 and 366:
Server Software O Offline Editor F
Page 367 and 368:
Server Software Admin is like any o
Page 369 and 370:
Server Software To set up a new con
Page 371 and 372:
Server Software User Setup changes
Page 373 and 374:
Macros Pre-Assigned Macros There ar
Page 375 and 376:
Macros Deleting a Macro Macros can
Page 377 and 378:
Macros You can view and edit macros
Page 379 and 380:
Macros This adds the keystrokes int
Page 381 and 382:
Macros file:///C|/LIGHTP/HELP.ENG/p
Page 383 and 384:
R120 Handheld Remote ❍ Operating
Page 385 and 386:
R120 Handheld Remote [9][THRU][1][2
Page 387 and 388:
R130 Handheld Remote R130 Handheld
Page 389 and 390:
R130 Handheld Remote Installing the
Page 391 and 392:
Designer Remote Designer's Remote T
Page 393 and 394:
Designer Remote Updates channel 1 a
Page 395 and 396:
Archive Screen Whole Show: This inc
Page 397 and 398:
Archive Screen The following show l
Page 399 and 400:
Archive Screen {SAVE PASSWORD} Allo
Page 401 and 402:
Archive Screen Why Save the Show? I
Page 403 and 404:
Archive Screen console on again. If
Page 405 and 406:
Archive Screen 8. Press {LOAD BACKU
Page 407 and 408:
Archive Screen 2. Switch to the dri
Page 409 and 410:
Archive Screen To select a field, u
Page 411 and 412:
Archive Screen 3. Use the Wheel to
Page 413 and 414:
Report Displays Report Displays Ent
Page 415 and 416:
Report Displays Last Move The last
Page 417 and 418:
Report Displays (c) Blank Parts Rec
Page 419 and 420:
Report Displays Output Shows the sp
Page 421 and 422:
Report Displays This screen is disp
Page 423 and 424:
Report Displays The Access Rights S
Page 425 and 426:
Report Displays and provide no user
Page 427 and 428:
Report Displays The Internal Diagno
Page 429 and 430:
Report Displays Note: If you have a
Page 431 and 432:
Console Reporter Console Reporter C
Page 433 and 434:
Console Reporter line. (Refer to Di
Page 435 and 436:
Console Reporter The log shows the
Page 437 and 438:
Console Reporter Note: Alternativel
Page 439 and 440:
Direct Output Control Direct Output
Page 441 and 442:
Direct Output Control by the Output
Page 443 and 444:
Common Features Common Features The
Page 445 and 446:
Common Features Live Screen Format
Page 447 and 448:
Common Features Effects / Channel L
Page 449 and 450:
Common Features [DISABLE] keylock s
Page 451 and 452:
Profiles Profiles Profiles let you
Page 453 and 454:
Profiles The title bar shows the da
Page 455 and 456:
Profiles Each end point, and any po
Page 457 and 458:
Profiles more points. Each end poin
Page 459 and 460:
Profiles [PB] [2] [PROFILE] [PROFIL
Page 461 and 462:
Patches ● ● ● ● ● ● ●
Page 463 and 464:
Patches Refer to Patching Channel I
Page 465 and 466:
Patches Attributes) # N (magenta) T
Page 467 and 468:
Patches the same or another output,
Page 469 and 470:
Patches Copying Patch Information P
Page 471 and 472:
Patches command. Press [*] again. [
Page 473 and 474:
Patches Note: Submasters and effect
Page 475 and 476:
Patches [1] [THRU] [2] [0] [4] [8]
Page 477 and 478:
Patches Since profiles set here are
Page 479 and 480:
Patches [1] {@NON} [5] {@NON} [*] A
Page 481 and 482:
Handheld Remotes Handheld Remotes C
Page 483 and 484:
Effects [FX] # [.] # selects the sp
Page 485 and 486:
Effects [FX] # [TEXT] text [*] chan
Page 487 and 488:
Effects When the effect is run or s
Page 489 and 490:
Effects [FX] [1] {LEVEL} [NORMAL] [
Page 491 and 492:
Effects [FX] [1] {STOP AFTER}[TIME]
Page 493 and 494:
Effects Step Time The step time con
Page 495 and 496:
Effects High Scaling sets the perce
Page 497 and 498:
Effects The Live Screen - Effects W
Page 499 and 500:
Effects yellow The playback is runn
Page 501 and 502:
Effects [FX LOAD] [FX] [PB] #[*] (C
Page 503 and 504:
Effects [FX GO] starts the current
Page 505 and 506:
Effects Updating Effects The effect
Page 507 and 508:
Effects ❍ ❍ ❍ ❍ ❍ ❍ ❍
Page 509 and 510:
Effects The Effects Screen - Lightp
Page 511 and 512:
Effects Next Fx The next effect to
Page 513 and 514:
Effects Changes effect 1 up fade ti
Page 515 and 516:
Effects Using recording commands wh
Page 517 and 518:
Automod [8] {A-MOD FROM} [3] [@] [8
Page 519 and 520:
Automod Using Automod with Moving L
Page 521 and 522:
Key, Wheel VDU Remapping Remapping
Page 523 and 524:
Key, Wheel VDU Remapping Notes 1. O
Page 525 and 526:
Key, Wheel VDU Remapping Function K
Page 527 and 528:
Key, Wheel VDU Remapping The follow
Page 529 and 530:
Key, Wheel VDU Remapping Top of Pag
Page 531 and 532:
Contents ❍ ❍ ❍ ❍ ❍ ❍ SN
Page 533 and 534:
Table Of Contents Common Features
Page 535 and 536:
Table Of Contents ● ● ● ●
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Table Of Contents ❍ ❍ ■ Conso
Page 545 and 546:
Table Of Contents ● Viewing and E
Page 547 and 548:
Table Of Contents ❍ ■ Installin
Page 549 and 550:
Table Of Contents ❍ ❍ ❍ ❍
Page 551 and 552:
Table Of Contents Server Software
Page 553 and 554:
Table Of Contents ● Showport File
Page 555 and 556:
Notes changes made when you install
Page 557 and 558:
SN100 and SN102 Network Nodes SN100
Page 559 and 560:
SN100 and SN102 Network Nodes SN102
Page 561 and 562:
SN100 and SN102 Network Nodes Servi
Page 563 and 564:
SN100 and SN102 Network Nodes 5 GND
Page 565 and 566:
SN100 and SN102 Network Nodes 14 12
Page 567 and 568:
Ethernet Overview Thick Net This us
Page 569 and 570:
Ethernet Overview A typical configu
Page 571 and 572:
Ethernet Overview ❍ ❍ ❍ Ether
Page 573 and 574:
Ethernet Overview Ethernet Card Ins
Page 575 and 576:
Tutorial The More Key The [MORE] ke
Page 577 and 578:
SN103 and SN104 Network Nodes I/F N
Page 579 and 580:
Index Index A B C D E F G H I J K L
Page 581 and 582:
Index Channel Check Channel Control
Page 583 and 584:
Index Cue Sheet Macros (Show Setup
Page 585 and 586:
Index Effect Fade Times Effect Leve
Page 587 and 588:
Index The Internal Diagnostic Scree
Page 589 and 590:
Index Network Video (Networker) Net
Page 591 and 592:
Index Recording Effect Properties R
Page 593 and 594:
Index Setting Up an External Submas
Page 595 and 596: Index Tracking Backup Status (Netwo
Page 597 and 598: Index X Playback Order (User Setup
Page 599 and 600: QR Index ● ● ● ● ● ● Ch
Page 601 and 602: QR Index Profiles ● ● ● Recor
Page 603 and 604: QR Index SMPTE Time Code Events ●
Page 605 and 606: Common Commands QR Effect and Funct
Page 607 and 608: Common Commands QR Playback Control
Page 609 and 610: Common Commands QR IntChan AttChan
Page 611 and 612: Common Commands QR [FX] [SHIFT NEXT
Page 613 and 614: Common Commands QR Selects attribut
Page 615 and 616: Common Commands QR Channel Summary
Page 617 and 618: Common Commands QR {FORWARD} {LINKS
Page 619 and 620: Common Commands QR {EVENT LIST} {
Page 621 and 622: Common Commands QR - - - {LOAD BACK
Page 623 and 624: Events & Console Reporter QR Events
Page 625 and 626: Events & Console Reporter QR [SHIFT
Page 627 and 628: Events & Console Reporter QR [TIME]
Page 629 and 630: Events & Console Reporter QR [REPOR
Page 631 and 632: Patching QR [1][@ATT][2][@ATT][1][0
Page 633 and 634: Patching QR {SET} {COPY/SWAP}[1] {C
Page 635 and 636: Patching QR Key Sequence Action {C
Page 637 and 638: Channel levels, attributes and Dimm
Page 645: Channel levels, attributes and Dimm
Page 655 and 656: Cues & X Playbacks QR [1] [+] [2] [
Page 657 and 658: Cues & X Playbacks QR [RECORD] [CUE
Page 659 and 660: Cues & X Playbacks QR [CUE] [1] [WA
Page 661 and 662: Cues & X Playbacks QR [RATE] key 3r
Page 663 and 664: Cues and X Playbacks (Direct Entry
Page 673 and 674: Effects (Command Line Mode) Effects
Page 675 and 676: Effects (Command Line Mode) Modifyi
Page 677 and 678: Effects (Command Line Mode) [FX] [1
Page 679 and 680: Effects (Command Line Mode) [FX DIR
Page 681 and 682: Effects (Command Line Mode) [FX LOA
Page 683 and 684: Effects (Direct Entry Mode) Editing
Page 685 and 686: Effects (Direct Entry Mode) [FX] [1
Page 687 and 688: Effects (Direct Entry Mode) [FXGO]
Page 689 and 690: Effects (Direct Entry Mode) Updatin
Page 691 and 692: Groups CL Mode QR Key Sequence [1]
Page 693 and 694: Groups CL Mode QR [1] [THRU] [5] [@
Page 695 and 696: Groups (Direct Entry Mode) Direct 1
Page 697 and 698:
Profiles + Macros QR Profiles and M
Page 699 and 700:
Profiles + Macros QR {DELETE POINT}
Page 701 and 702:
Profiles + Macros QR [MACRO] [MACRO
Page 703 and 704:
Submasters (Command Line Mode) [REC
Page 705 and 706:
Submasters (Command Line Mode) [*]
Page 707 and 708:
Submasters (Command Line Mode) [UPD
Page 709 and 710:
Submasters DE Mode QR Submasters (D
Page 711 and 712:
Submasters DE Mode QR Only edited a
Page 713 and 714:
Submasters DE Mode QR [SUB] [1] {SU
Page 715 and 716:
Submasters DE Mode QR [SUB] [7] [*]
Page 717 and 718:
510i QR 510i and 310 Show Controlle
Page 719 and 720:
510i QR [SELECT] [SHIFT] {LAST 4} [
Page 721 and 722:
510i QR {CONTR DOWN} {CONTR UP} {BA
Page 723 and 724:
Setup QR CC Auto Hold Mode On Off O
Page 725 and 726:
Setup QR X Playback Colours X Playb
Page 727 and 728:
Setup QR High 20 x 20 grid - A4 20
Page 729 and 730:
Setup QR Auto Preheat Off, On Autom
Page 731 and 732:
Setup QR On Mode = Sub bumped to ve
Page 733 and 734:
Setup QR Trig Macro 1..1999 Number
Page 735 and 736:
Setup QR Off No Handheld Handheld R
Page 737 and 738:
Setup QR file:///C|/LIGHTP/HELP.ENG
Page 739 and 740:
Glossary of Terms Auto Channel Pagi
Page 741 and 742:
Glossary of Terms Console Reporter
Page 743 and 744:
Glossary of Terms Direct 2 Digit A
Page 745 and 746:
Glossary of Terms Flash Softkey Fla
Page 747 and 748:
Glossary of Terms Multiplex Non-dim
Page 749:
Glossary of Terms Sub Submaster Sup
show all

GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Create successful ePaper yourself

Delete template?

Save as template?