GeniusPro/Lightpalette Operator's Manual - Strand Lighting

510i Show Controller
macro against each sub. The currently selected sub is identified by a > marker after the sub number.
Using the LCD softkeys, the operator can scan through the six pages of subs, select a sub from the
displayed page and increment, decrement, or bump the sub level as follows:
{LAST} Moves the marker to the previous sub on the page.
{NEXT} Moves the marker to the next sub on the page
{PAGE +} Increments the sub pages, e.g., 1>2>3>4>5>6>1, etc.
{DOWN %} Decrements the level of the currently selected sub by 5%.
{UP %} Increments the level of the currently selected sub by 5%.
{BUMP SUB} Bumps the currently selected sub.
While the [SHIFT] key is depressed (or toggled On - 310), an alternative set of softkeys is displayed as
follows:
{LAST 8} Displays the previous eight subs on the selected page.
{NEXT 8} Displays the next eight subs on the selected page.
{PAGE -} Decrements the sub pages, e.g., 6.5.4.3.2.1.6, etc.
{TO 0%} Sets level of currently selected sub to 0%.
{TO 100%} Sets level of currently selected sub to 100%.
{BUMP SUB} Bumps the currently selected sub.
Browse Display and Menu
The Browse Display and Menu lists all light shows stored within the 510i or 310 hard disk, or floppy
disk (or server if used) and enables the operator to browse through the list of shows either on the hard
disk, or floppy disk (or server), to load a show for playback, or to copy a show between disks and/or
directories. This menu is also used in conjunction with the floppy disk drive to load new operating
software.
This section covers the following topics
❍
❍
❍
Loading a Show
Copying a Show
Loading Operating Software
Loading a Show
To load a show from floppy or hard drive, use the {LAST} and {NEXT} softkeys to position the >
marker alongside the drive field (A:) or the hard drive field (C:) and press {SELECT}. Press the {LAST}
or {NEXT} softkey to position the marker alongside the Directory field and press the {SELECT} softkey
file:///C|/LIGHTP/HELP.ENG/page47.htm (4 of 10)11/2/2004 3:02:20 AM