GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Working with Channel Levels
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Extending the Current Channel Selection
Selecting the Next or Last Channel
Clearing the Current Selection
Setting Levels with the Keypad
Using Recorded Items in Channel Lists
Attribute Groups
Attribute Filters
Referenced Groups
Using the Level Wheel
Setting Attribute Levels
Setting DMX Levels
Copying Channel Levels
Undoing Level Changes
Holding Channels on the Channel Control
Restoring Playback Levels
Flashing Channel Levels
Bumping Channel Levels
Channel Check
Changing Levels in Preview (Blind) Display
Fading in Intensity Channels in Time
Fading in Attribute Channels in Time
Editing the Command Line
At any time before a command on the command line is complete, you can move back through
the command line to correct it.
[CLR] Clears the last entered key when a command is being entered. If no command is being
entered this has no effect except in the Live display when it clears the current channel
selection.
[SHIFT] [CLR] Clears the complete command line when a command is being entered. If no
command is being entered it has no effect.
Setting Up the Channel Levels Window
file:///C|/LIGHTP/HELP.ENG/page5.htm (2 of 13)11/2/2004 3:02:44 AM