GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Groups
Deleting Groups
Groups can be deleted from the Group display. This is a good way to delete groups if you are only
going to delete a few. To learn how to delete all groups or a range of groups refer to Clear Operations
in the Archive Screen
To delete a group, press {DELETE} # [*].
{DELETE} [*] [*]
Deletes the current group.
[GROUP] [6] {DELETE} {DELETE}
{DELETE} [6] [*] [*]
Deletes group 6
Copying Levels From a Group
You can record submasters, cues, groups, and effect steps while you are in the Group display by
copying the group levels. The highlight must be on the group number (the Group field).
Using recording commands while you are in the Group display copies the Group display levels to the
target submaster, cue, group, or effect step. For example, if the current group is 1, then [CUE] [2]
[RECORD] will copy the levels from group 1 into cue 2. This also allows groups to be copied. For
example [GROUP] [4] [RECORD] will copy the levels from group 1 into group 4.
Top of Page
file:///C|/LIGHTP/HELP.ENG/page23.htm (11 of 11)11/2/2004 3:02:42 AM