GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Console Reporter
Sets Output Limit and Load Limit filter On (not displayed) for faults on dimmers patched to channels 2
to 5.
[DIMMER] [2] [3] [4] [5] [THRU] [2] [3] [5] [0] [SHIFT] [FILTER] [*]
Sets all filters of dimmers 2345 to 2350 to On (all fault displays inhibited in range)
[DIMMER] [1] [FILTER] [*]
Sets all filters of dimmer 1 to Off, such that all fault conditions on dimmer 1 are displayed.
[DIMMER] [2] [3] [4] [5] [REPORT]
Shows the summary display for dimmer 2345.
[DIMMER] [AT CHAN] [1] [2] [3] [4] [REPORT]
Shows the summary display for the first dimmer patched to channel 1234.
Note: Dimmer Filter settings cannot be printed
Dimmer Log Screen
Pressing the [REPORT] key and the {DIMMER LOG} softkey will display the Dimmer Log screen
comprising a scrolling display showing a maximum of 200 date stamped fault reports in chronological
order. The log is automatically updated.
file:///C|/LIGHTP/HELP.ENG/page11.htm (4 of 8)11/2/2004 3:03:05 AM