GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Patching QR
[1][@ATT][2][@ATT][1][0][*]
Patch dimmer 1 to AttChannel 2, max
frame 10
[1][@ATT][2][@ATT][*]
Patch dimmer 1 to AttChannel 2, default
max frame
[1][@ATT][2][*]
Patch dimmer 1 to AttChannel 2, keep
max frame
[1][@ATT][@ATT ][1][0][*]
Set dimmer 1 max frame to 10, keep
channel
[1][@ATT][@ATT][- ]1][0][*]
Set dimmer 1 max frame to -10
(inverted), keep channel
[1][@ATT][@ATT][*]
Default dimmer 1 max frame, keep
channel
[1] [@ATT][*] Unpatch dimmer 1
[1]{@NON}[2]{@NON}[1][*]
Patch dimmer 1 to channel 2, non-dim
threshold 1%
[1]{ @NON}[2]{@NON}[*]
Patch dimmer 1 to channel 2, default nondim
threshold
[1]{@NON}[2][*]
Patch dimmer 1 to channel 2, keep nondim
threshold
[1[[@NON][@NON][1][*]
Set dimmer 1 threshold to 1%, keep
channel
[1][@NON][@NON][*]
Default dimmer 1 threshold, keep
channel
[1][@NON][*] Unpatch dimmer 1
[1][PROFILE][4][5][*]
Assign profile to dimmer 1 [or delete]
Not after @NON
[1][@6K12K][*]
Sets dimmer 1 to be 6k12k dimmer, or
reverts to normal if already 6k12k
[NEXT]
Moves to next page of Patch screen
[LAST]
Moves to last page of Patch screen
Patching Fixtures
The following commands are common to Command Line and Direct Action modes for
GeniusPro and Lightpalette.
Key Sequence
Action
file:///C|/LIGHTP/HELP.ENG/page59.htm (2 of 6)11/2/2004 3:03:27 AM