GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Effects
the step number rather than timing or level data.
Once the cursor is on the effect step number, use [NEXT] and [LAST] to move between steps and
view channel levels.
Editing Step Channel Levels
First select the step and ensure that the highlight is on the step number (the FX STEP field). The
channels can then be selected and modified using the same commands as for Channel Control, for
example [1] [@] [1] [*], [SUB] [1] [@] [5] [*] and so on. The Level Wheel and some of the soft keys in
the Channel Control cannot be used to change levels.
Deleting Effect Steps
Steps can be deleted from the Effect display. This is a good way to delete effects if you are only going
to delete a few. For information on how to delete all effects or a range of effects from the Archive
display turn to Clear Operations
{DELETE} appears on the LCD Effect menu when you are in the Effect display and delete steps, either
a single step or a single THRU range can be specified. The highlight must be on the step number. This
can be used with [+], [-], and [THRU] keys.
{DELETE} {DELETE} Direct Entry 1 and 2 Digit
{DELETE} [*] Direct Entry 1 and 2 Digit
{DELETE} {DELETE} {DELETE} Command Line
{DELETE} [*] [*] Command Line
Deletes the current step.
[FX] [1] [.] [2] {DELETE} {DELETE} All Modes
Deletes effect 1 step 2.
[FX] [1] [.] [2] [THRU] [3] [.] [4] {DELETE} {DELETE} All Modes
Deletes effect 1 step 2 through effect 3 step 4.
Copying Levels From an Effect Step
You can record submasters, cues, groups, and effect steps while you are in the Effect display. The
highlight must be on the step number (the FX STEP field).
file:///C|/LIGHTP/HELP.ENG/page35.htm (33 of 34)11/2/2004 3:03:13 AM