GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Events & Console Reporter QR
[GOTO] [DIMMER] {BACKUP} [8]
[*]
[DIMMER] [1] {FILTER} {HIGH
DC} [*]
[DIMMER] [1] [FILTER] [*]
[DIMMER] {AT CHAN} [2] [THRU]
[5] {FILTER} {OUTPUT ERROR}
{LOAD LIMIT} [*]
[DIMMER] [2] [3] [4] [5] [THRU] [2]
[3] [5] [0] [SHIFT] [FILTER] [*]
Instructs all dimmer racks to fade the
backup scene 8 in the recorded fade time.
(1-99 user recordable, 0 = blackout, 254
= fully on)
Displays all dimmer faults for dimmer 1,
except High DC Voltage
Sets all filters of dimmer 1 to Off, such
that all fault conditions on dimmer 1 are
displayed.
Sets Output Error and Load Limit filter
On (not displayed) for faults on dimmers
patched to channels 2 to 5.
Sets all filters of dimmers 2345 to 2350
to On (all fault displays inhibited in
range)
Console Reporter Commands (Direct Action Mode)
Key Sequence
[REPORT] {DIMMER LOG}
[REPORT] {DIMMER LOG}
{CLEAR}
[REPORT] {DIMMER LOG} {RE-
SYNC}
[REPORT] {DIMMER LOG}
{LEARN LOAD} {RACK} [2] [6] [*]
[*]
[REPORT] {DIMMER LOG}
{LEARN LOAD} [DIMMER] [2] [3]
[4] [5] [*] [*]
[REPORT] {DIMMER LOG}
{LEARN LOAD} [DIMMER} [AT
CHAN] [1] [2] [3] [4] [*] [*]
[REPORT] {DIMMER LOG}
{LEARN LOAD} [DIMMER] {AT
CHAN} [1] [4] [5] [6} [*] [*]
Action
If Reporter is set to On in the Console
Setup Screen, The Dimmer Log screen is
displayed..
Clears all logged faults
Re-synchronizes dimmer log to current
rack status.
Learns load on rack 26
Learns load on dimmer 2345
Learns load at channel 1234
Learns loads on all dimmers on the
channel 1456.
file:///C|/LIGHTP/HELP.ENG/page69.htm (6 of 7)11/2/2004 3:03:27 AM