GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Running Cues
Profile
F #
Start the effect numbered.Refer to Product Specification for number
of effects
f # Stop the effect. Refer to Product Specification for number of effects
The assigned Up/Down profile. You can assign separate profiles for
the up and down fades.
Note: The text label (caption) assigned to the cue is shown at the far right end of the second line of
cue information, without a field label.
Cue Properties (Lightpalette)
Each cue has a number of properties, which are displayed in the Live display State screen. When the
X Playback Format field in the User Setup Screen is SPREAD SHEET, the property associated with
each display field is indicated by the title line. When the X Playback Format field is EXPANDED or
EXPANDED - FADE TIME the fields are labelled to their left. The Lightpalette default setting for the X
Playback Format field is EXPANDED.
Q The recorded cue number.
P The cue part (1 to 12) if it is a Tracking Cue. Otherwise blank.
Time
The split fade times. If not split, only the up fade time is shown. Fade
times can be from one hundredth of a second to 59 minutes and 59
seconds as shown for Fade Times or manual (off). The way in which
fade progress and remaining time is shown depends on the X Playback
Format field in the User Setup display.
Wait
The wait time. Blank if the wait time is off. While a cue is running, the
remaining wait time appears under this value. The colour indicates its
state.
Delay
The cue split delay times. If not split only the up fade delay is shown.
Blank if there are no delays. Shows initial delay times before a cue is
run, the time remaining in the delay while a cue is running, and the
original delays again when the fade completes. The colour indicates
their state.
Link Used for cue linking and looping:
file:///C|/LIGHTP/HELP.ENG/page7.htm (5 of 25)11/2/2004 3:02:36 AM