GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Effects (Command Line Mode)
Key Sequence
[FXSEL] (500 Series Consoles only)
[SHIFT] [FXSEL] (500 Series
Consoles only)
[FX GO]
[FX STOP]
[FX] [1] [FX GO]
[FX] [1] [PB] [2] [FX GO]
Select next Fx Pb
Action
Select previous Fx Pb
Starts/Stops selected Pb and fades
In/Out. Always starts from step 1
If effect 1 is already loaded, this
selects that playback then starts it.
Otherwise it selects the first unloaded
Playback (if any), loads it with effect
1 and starts it.
Loads effect 1 onto playback 2 and
starts it.
[FX] [PB] [2] [FX GO]
Loads the current effect onto
playback 2 and starts it.
[FX PAUSE]
[FX] [1] [FX PAUSE]
[FX] [PB] [2] [FX PAUSE]
[FX] [1] [PB] [2] [FX PAUSE]
[FX STEP]
[FX TYPE]
Stops/restarts selected Pb without
fading In/Out
If effect 1 is already loaded, selects
that playback then pauses or restarts
it. If effect 1 has never been started
and paused, this command is
ignored. If effect 1 is not loaded,
selects the first unloaded playback (if
any) and loads it with effect 1
If playback 2 is loaded, selects the
playback and then pauses or restarts
it. If the playback is not loaded, loads
the current effect onto the playback.
If effect 1 is loaded on playback 2,
selects then pauses or releases it. If
effect 1 is not loaded on playback 2,
selects playback 2 and loads it with
effect 1
Manually moves to the next effect
step, if the Step Control field is set to
Manual.
Selects next Fx Type (via soft menu)
file:///C|/LIGHTP/HELP.ENG/page62.htm (6 of 9)11/2/2004 3:03:32 AM