GeniusPro/Lightpalette Operator's Manual - Strand Lighting

GeniusPro/Lightpalette Operator's Manual
chanA AUTOMOD_FROM chanB @ FULL * Copy over level info
- To help avoid an accidental level changes in preview pressing *
on an empty command line no longer selects all channels. This now
only works on Output.
- SHIFT LOADx1 (on an empty command line) reloads the cue in X
playback 1 thereby removing any modifications done whilst in
playback preview. Likewise SHIFT LOADx2 reloads the cue in X
playback 2. (SHIFT LOADx1 used to be LOADx2)
- Current cue number & text shown on prompt line of output display.
- Attribute fade colours are now correct on output
- On output when updating (with a leading channel list) a preset
focus group, after the update those channels get set to the preset
focus group position.
- [chan list] UPDATE GROUP [INTS_ONLY | ATTS_ONLY | @ATT
filter] * On output updates channels into the preset group they were
previously set to. Using channel control reapplies those channels to
the preset groups. Can use the CONTROL display format to view
what preset group the channel will get recorded into. Dark gray
indicates channel was at this position.
- Now now set a cue/sub/group text comment when updating eg
chanlist UPDATE GROUP group TEXT text *
- When submaster bump key is config'd as Mac pressing that bump
key runs the macro number of that submaster plus 100, pressing
SHIFT + bump key runs the macro of that submaster plus 300.
SubBump12 runs macro 112, SHIFT+SubBump12 it runs Macro
312. When the submaster bump key is not config'd as Mac SHIFT
+SubBump still is the short cut way to edit that submaster in
preview.
- 220node.cfg field_lock_mode
Set to 0 to disable the preview field locking. ie on entry to a preview
screeen the fields will not be locked out (yellow).
- DMX Ports 1 & 2 default to DMX OUT.
- Effect List display added.
- On X playback expanded cue sheet format the AttTime is
displayed.
- On all X playback formats a cue is marked running (in red) if either
the int or att fades are still running.
- Last of multiple running MF's are shown correctly on X playback
history section.
- All attributes can now be 16bit. fixture.lib has the details but
basically you need to create a fixture with an attribute of xAA (AA =
2..99) which is the least significant 8 bits of the 16bit number. You
can only patch 16bit attribute by using a fixture - you cannot patch a
16bit attribute directly in syntax. Thoughout the console you only
need to specify AA & it will include all 16bits. When using the
rotaries to wheel the value you can use coarse mode as per the
trackball to speed up the wheeling (press the middle trackball
button while moving the rotary). Attributes 56..59 are no longer
used & you cannot select these any more. Loading an old show
with these attributes present gets automatically converted to the
new attributes.
- X playback partitioning now has 3 modes: OFF, X1/X2, USER
OFF As per v2.5 sw ie all playbacks common to all users
X1/X2 As per v2.5 sw ie all playbacks common to all users
X1 only uses channels in X1 group, X2 only if in X2 group
USER New mode. Playbacks are different for each user & only the
channels in that users partition can be used. In this mode
there is no splitting of channels between X1 & X2
- LIVE LIVE now keeps the same channel position when swapping
between tracker & non tracker channel display formats.
- UPDATE supports CHANSIN & ADDALL modifiers. Leading
channel list of update always adds these channels unless
CHANSIN is specified. Cue defaults to addall, sub & group default
to ChansIn.
- Channels are marked in cyan after an update - LP only.
includes a Microsoft back-up utility, you may use the utility to make
the single back-up copy. After the single back-up copy is made, the
backup utility will be permanently disabled. Except as expressly
provided in this EULA, you may not otherwise make copies of the
SOFTWARE PRODUCT, including the printed materials
accompanying the SOFTWARE.
2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
· Limitations on Reverse Engineering, Decompilation and
Disassembly. You may not reverse engineer, decompile, or
disassemble the SOFTWARE, except and only to the extent that
such activity is expressly permitted by applicable law notwithstanding
this limitation.
· Single SYSTEM. The SOFTWARE is licensed with the SYSTEM as
a single integrated product. The SOFTWARE may only be used with
the SYSTEM.
· Rental. You may not rent or lease the SOFTWARE.
· Software Transfer. You may permanently transfer all of your rights
under this EULA only as part of a sale or transfer of the SYSTEM,
provided you retain no copies, you transfer all of the SOFTWARE
(including all component parts, the media, any upgrades or backup
copies, and this EULA, and if applicable, the Certificate(s) of
Authenticity), and the recipient agrees to the terms of this EULA. If
the SOFTWARE is an upgrade, any transfer must include all prior
versions of the SOFTWARE.
· Termination. Without prejudice to any other rights, Manufacturer or
MS may terminate this EULA if you fail to comply with the terms and
conditions of this EULA. In such event, you must destroy all copies of
the SOFTWARE and all of its component parts.
· Single EULA. The package for the SOFTWARE may contain
multiple versions of this EULA, such as multiple translations and/or
multiple media versions (e.g., in the user documentation and in the
software). In this case, you are only licensed to use one (1) copy of
the SOFTWARE PRODUCT.
· Export Restrictions. You agree that you will not export or re-export
the SOFTWARE to any country, person, entity or end user subject to
U.S. export restrictions. You specifically agree not to export or reexport
the SOFTWARE (i) to any country to which the U.S. has
embargoed or restricted the export of goods or services, which as of
May 1999 include, but are not necessarily limited to Cuba, Iran, Iraq,
Libya, North Korea, Sudan, Syria, and the Federal Republic of
Yugoslavia (including Serbia, but not Montenegro), or to any national
of any such country, wherever located, who COMPANY knows
intends to transmit or transport the product(s) back to such country;
(ii) to an end user you know or have reason to know will utilize the
SOFTWARE in the design, development or production of nuclear,
chemical or biological weapons; or (iii) to any end-user who has
been prohibited from participating in U.S. export transactions by any
federal agency of the U.S. government.
3. UPGRADES AND RECOVERY MEDIA.
· If the SOFTWARE is provided by Manufacturer on media separate
from the SYSTEM and is labeled "For Upgrade Purposes
Only" ("Upgrade SOFTWARE"), you may install one copy of the
Upgrade SOFTWARE onto the SYSTEM as a replacement copy for
the SOFTWARE originally installed on the SYSTEM and use it in
accordance with Section 1 of this EULA. You may also install
additional copies of the Upgrade SOFTWARE as replacement copies
onto additional SYSTEMS which are the same brand and model as
the SYSTEM and contain a duly licensed copy of the same version
and language release of the SOFTWARE ("ADDITIONAL
SYSTEMS"), provided that (1) Manufacturer has supplied a
corresponding serialized sticker for each additional copy of the
Upgrade SOFTWARE, and (2) you affix a serialized sticker per
Manufacturer's instructions for each unit of Upgrade SOFTWARE
you install.
· If the SOFTWARE is provided by Manufacturer on separate media
file:///C|/LIGHTP/HELP.ENG/INDEX.HTM (9 of 11)11/2/2004 3:02:16 AM