GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Archive Screen
Filename: The file name of the show on the disk. All shows are saved with a .ssf extension.
Backups: Shows whether any backup copies are stored on the disk.
You can access all software, disk, printing and clearing operations from one of the Archive
displays.
Pressing [ARCHIVE] brings up the LCD Archive menu. This shows the soft keys {SAVE
SHOW}, {LOAD SHOW}, {BROWSE FILES}, {PRINT}, {CLR} and {SOFT}.
The section covers the following topics:
●
●
●
●
Software Operations
Disk Operations
Print Operations
Clear Operations
Software Operations
Press [ARCHIVE] {SOFT} to show the LCD Software menu. This is used to load new
operating and application software and to password enable the application software.
Operating Software is the GeniusPro and Lightpalette operating system. Application software
is any optional software which runs on the operating software, e.g., CommuniquePro, Tracker,
Server, Networker, Shownet, Showport and PC Software.
In this display the LCD changes to the Software menu with a number of soft keys. {SAVE
PASSW}, {ENTER PASSW}
{LOAD SOFT} and {BACK}.
{BACK} sends you back to the LCD Archive menu.
The following topics are covered in this section:
❍
❍
❍
Password Operations
Loading Operating Software
Loading Application Software
Password Operations
file:///C|/LIGHTP/HELP.ENG/page27.htm (5 of 19)11/2/2004 3:03:02 AM