GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters DE Mode QR
With Edit fields Green as above
highlight the Bump field of the
required Sub number and adjust its
value to Flsh, F+S, OFF, Mac or Solo
Sets the individual submaster bump
key to:
Flsh: Flashes the Sub channels to
the level set by the Flash
Supermaster (if any), or 100%
F+S: As above. All other (nonbumped)
channels are set to zero
OFF: Sub Bump key has no effect.
Mac: Triggers the macro with the
same number as the bump button
(not the macro assigned to the bump
button)
Solo: Sub channels unffected. All
other channels are set to zero
{KEYS LATCH}
[SUB] [1] [TIME] [4] [/] [5]
[REC TIME]
or
[SUB] [1] [TIME] [4] [/] [5] [*]
Pressing the submaster bump keys
to latch as described above until the
sub bump button is pressed again.
No effect if individual sub bump
mode is set to OFF.
Sets sub 1 to split fade times
[SUB] [1] [@ATT] [TIME] [6] [*] Sets sub 1 attribute fade time.
[SUB] [1] {EXTSUB} [6] [*] Sets sub 1 link to external sub 6.
[SUB] [1] {SUB FUNC} {NORMAL}
[*]
Sets sub 1 with function = normal
[SUB] [1] {SUB FUNC} {INHIBIT} [*] Sets sub 1 with function = inhibitive.
[SUB] [1] {SUB FUNC} {INDEP} [*]
Sets sub 1 with function =
independent
[SUB] [1] {SUB FUNC} {EXCLUS} [*] Sets sub 1 with function = exclusive
[SUB] [1] {SUB FUNC} {SUPER}
[SUB SUPER} [*}
[SUB] [1] {SUB FUNC} {SUPER}
{FLASH SUPER} [*]
[SUB] [1] {SUB FUNC} {SUPER}
{FX SUPER} [*]
[SUB] [1] {SUB FUNC} {SUPER}
{MIDI RATIO} [*]
Sets sub 1 with function = submaster
supermaster
Sets sub 1 with function = flash
supermaster
Sets sub 1 with function = effect
supermaster
Sets sub 1 with function = MIDI Ratio
supermaster
file:///C|/LIGHTP/HELP.ENG/page67.htm (4 of 8)11/2/2004 3:03:36 AM