GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Running Cues
Running Cues
see also:
Recording Cues
X Playback
This section contains the following topics:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
The Current Cue
Running Timed Cues
Running Manual Cues
Loading a Cue
Loading a Cue with Overrides
Changing Cue Direction
Jumping Directly to a Cue
Using the Rate/Level Wheel to Change Fade Progress (500 Series Consoles)
Using the Level Wheel to Change Fade Progress (300 Series Consoles)
Cue Fade Progress in Manual Time
Updating and adding to Cues
Updating Cues from the Live Screen
Changing Cues Temporarily
Fading Cues with the Level Wheel
Viewing and Editing Cues
The Current Cue
The CUE field in the right LCD shows the current cue. This is the last cue which has been referenced.
It can be used in a cue selection.
All cue recording commands act on a single cue part. When you press [CUE], the soft keys change to
include {PART} which lets you select one of the cue parts. [PART] is a hard key on 300 Series
consoles.
If you do not include a cue part, part 1 is assumed for a new cue and the current part is assumed for
an existing cue.
file:///C|/LIGHTP/HELP.ENG/page7.htm (1 of 25)11/2/2004 3:02:36 AM