GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Designer Remote
Setting Levels
1 @ 5 *
Set channel 1 to 50%
.
2 + 9 @ 4.5 *
Set channels 2 and 9 to 45%.
9 THRU 12 @ 4 *
Set channels 9 through 12 to 40%
.
@ 5 *
Set current selection to 50%
.
ON
Set current selection to ON level
.
FULL
Set current selection to 100%
▲ Increase level(s) of the current selection.
▼Decrease level(s) of the current selection.
NEXT
Next channel if a channel is selected, otherwise next cue.
LAST
Last channel if a channel is selected, otherwise last cue.
REM-DIM
Set current selection to On and turn all other channels Off.
Recording & Playback
RECORD CUE 1 *
Record current levels into cue 1.
GO
Run the next cue on X PLAYBACK 1.
Alternative Keys (using 0 (SHIFT))
1 * 0 @FULL
Sets channel 1 to Full
1 @ 5 0 UPDATE CUE 6 *
file:///C|/LIGHTP/HELP.ENG/page19.htm (2 of 3)11/2/2004 3:02:59 AM