GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Running Cues
fade rate, or both. When you first press {RATE}, both are highlighted.
Changing the current fade rate does not change the recorded fade time for any cues or parts. Rather, it
changes the time remaining for cues that are running when you press {RATE}. If there is more than
one cue or cue part running when you press {RATE}, the Rate Wheel changes their fade rates
proportionally.
The Rate Wheel loses control of fades when all fades are completed, or when a new fade is started.
To move the cursor ( > ) up or down and select a single cue or part for Rate Wheel control, press up or
down When you are controlling only one cue, to return to controlling all of the running cues or parts,
press {UNRATE} {RATE}.
To toggle the up fade rate control between on and off, press {UPRATE}. When there is a bar above
this soft key, the Rate Wheel changes the fade time of channels which are fading up.
To toggle the down fade rate control between on and off, press {DOWN RATE}. When there is a bar
above this soft key, the Rate Wheel changes the fade time of channels which are fading down.
To return the fader to normal functioning, press {UNRATE}. Changes you made with the Rate Wheel
still apply to running cues or parts, but the Rate Wheel no longer controls any fades.
Using the Level Wheel to Change Fade Progress (300 Series Consoles)
Normally cue fades progress automatically. However, you can use the Level Wheel to change the fade
progress of all currently running cues or parts on either X playback, or change the rate of a single
running cue or cue part.
To put all fades on a playback under Rate Wheel control, press the appropriate [RATE] key. Both
[RATE] keys are toggle keys which set the status of the rate control for either X playback and operate
as follows:
First Press Up and Down Fade Both UP and DN LEDs illuminated
Second Press Up only Fade UP only LED illuminated
Third Press Down only Fade DN only LED illuminated
Fourth Press Unrate Both UP and DN LEDs extinguished
Selecting Up rate, Down rate or both automatically changes the level wheel to a rate wheel while the
rate function is selected. Set the fade progress for Up or Down fade progress or both, then press the
file:///C|/LIGHTP/HELP.ENG/page7.htm (11 of 25)11/2/2004 3:02:36 AM