GeniusPro/Lightpalette Operator's Manual - Strand Lighting

510i Show Controller
Macro Display and Menu
The 510i and 310 Macro Display and Menu enables viewing and play back of sequences of commands
previously recorded using a Series 300, 430, 500, LBX or GSX console. Up to 2000 macros (0-1999)
may have been recorded. (Refer to Macros)
Up to eight macros can be displayed at one time on the LCD display, the currently selected macro
identified with the marker > after the macro number. Pressing [SHIFT][DISPLAY] will enter the Macro
Screen.
Individual macros can be selected from the macro display and run using the softkeys, as follows:
{LAST} Selects the previous macro in the macro list.
{NEXT} Selects the next macro in the macro list
{MACRO-100} Subtract 100 from the current macro number (if applicable) and display as the current
macro.
{MACRO+100) Add 100 to the current macro number (if applicable) and display as the current macro.
{FIRST MACRO} Selects the first macro as current.
{RUN} Runs the selected macro.
While the [SHIFT] key is depressed (or toggled On - 310), an alternative set of LCD softkeys is
displayed, as follows:
{LAST 8} Displays the previous eight macros.
{NEXT 8} Displays the next eight macros
{MACRO-100} As before
[MACRO+100} As before
{FIRST MACRO} As before
{RUN} As before
Note: Macros 951 to 964 and 971 to 984 are reserved for the fourteen macro keys on the 510i panel
and 310 on-screen softkeys. Pressing [P1] to [P14] selects and runs macros 951 to 964 respectively.
Pressing [SHIFT] [P1] to [P14] selects SP1 to SP14 and runs macros 971 to 984 respectively. All 28
macros can be selected and run from the macro display as described above. Pressing the [USER]
button on the panel, applies macro 998. Pressing the [STOP SHOW] button runs macro 997.
Submasters Display and Menu
The 510i and 310 Submaster Display and Menu enables viewing and play back of up to 54 submasters
previously recorded using a Series 500, or Series 300 console). The display shows eight subs at a
time from the currently selected sub page and displays the sub number, level, text and associated
file:///C|/LIGHTP/HELP.ENG/page47.htm (3 of 10)11/2/2004 3:02:20 AM