GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters
channels that were not already in the submaster.
[SUB] [7] [*] [UPDATE] [SUB] [1] [*] (All Modes)
First selects all of the channels in submaster 7, then updates their levels in
submaster 1, excluding levels of channels that were not already in the
submaster.
Including the {ADD ALL} softkey in the update command includes level changes in
channels that are not already in the submaster.
[UPDATE]{ADD ALL} [SUB] # [*] (All Modes)
Updates levels in the specified submaster for channels that have been
modified. Includes modified channels that are not already in the
submaster, and channels that have been removed from the modified list by
using [SHIFT] [CLR]. Channels that are off in the selection will be
removed from the submaster.
[UPDATE]{ADD ALL} [SUB] [1] [*] (All Modes)
Updates all channels that have been modified in submaster 1, including
channels that are not already in submaster 1.
[SUB] [7] [*] [UPDATE] {ADD ALL} [SUB] [1] [*] (All Modes)
First selects all of the channels in submaster 7, then records their levels in
submaster 1, including channels that are not already in the submaster 7.
chan [UPDATE] [SUB] # [*] updates levels of the specified channels in the specified
submasters to match the current Levels screen for the selected channels, regardless of
whether or not they have been modified. Excludes channels that are not already in the
submaster, regardless of whether or not they have been modified. Channels that are off
in the selection will be removed from the submaster.
[1] [THRU] [5] [UPDATE] [SUB] [*] (All Modes)
Changes channel 1 through 5 levels in submaster 1, excluding channels
that are not already in the submaster. If the submaster fader is not at 0
then the updated levels are adjusted to avoid output bumps. For example,
if the submaster fader is at 50% and a channel level of 10% (from the
output) is updated, the level recorded into the submaster is actually 20%
so that the submaster output is 10%. The maximum level that can be
recorded into the submaster is 100% so output bumps can still occur with
a low fader and high levels.
Note: To clear the changed indicator and set red channel levels back to cyan, press [SHIFT] [CLR].
file:///C|/LIGHTP/HELP.ENG/page24.htm (13 of 25)11/2/2004 3:02:50 AM