GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Console Reporter
The log shows the date and time that each fault occurred, the rack and dimmer number and a
description of the fault. The lower portion of the screen shows a map of all configured racks (max. 99)
colour-coded as follows to show their status:
●
●
●
●
●
Green: Online
Red: Fault on rack, or on one or more of its dimmers
Grey: Offline
(Blank): Not configured
Yellow: Console is trying to find rack
If a rack number is flashing, at least one dimmer in that rack is load learning.
{CLEAR} Clears all logged faults, e.g., {CLEAR} [*] (command mode) or {CLEAR} {CLEAR}
(direct action). Confirmation is required.
{RE-SYNC} Re-synchronizes dimmer log to current rack status. E.g., {RE-SYNC} [*] (command
mode) or {RE-SYNC} {RE-SYNC} (direct action)
{LEARN LOAD} Used as part of command line as follows:
{LEARN LOAD} {RACK} [#] [#] [*] [*]
file:///C|/LIGHTP/HELP.ENG/page11.htm (5 of 8)11/2/2004 3:03:05 AM