GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters DE Mode QR
Key Sequence
[SUB] [+]
[SUB] [-]
[SUB PAGE] [4] [*]
Action
Select next submaster page
Select last submaster page
Select submaster page 4 [Page 1 if
page omitted].
Updating Submasters (Direct Action Mode)
The following Direct Action syntax examples are normally used with GeniusPro and are common to
Direct 1 Digit and Direct 2 Digit command modes
Key Sequence
[UPDATE] [SUB] [2] [RECORD]
[SHIFT] [SUB]
[UPDATE] [SUB] bump key
[1] [+] [2] [UPDATE] [SUB] [2]
[RECORD]
or
[1] [+] [2] [SHIFT] [SUB] [2]
[RECORD]
Action
All o/p chans in sub 2 under channel
control are updated, released from
channel control and the sub rerun
= [UPDATE] [SUB]
All o/p chans in sub n under channel
control are updated, released from
channel control and the sub rerun
Chans 1 & 2 are added to sub 2,
released from channel control, and
the sub rerun
[UPDATE] [SUB] [1] [*]
[SUB] [7] [*] [UPDATE] [SUB] [1] [*]
[UPDATE]{ADD ALL} [SUB] [1] [*]
Records levels that have been
modified live into submaster 1,
including levels of channels that are
not already in the submaster.
First selects all of the channels in
submaster 7, then updates their
levels in submaster 1, including
levels of channels that are not
already in the submaster.
Updates all channels that have been
modified in submaster 1, including
channels that are not already in
submaster 1.
file:///C|/LIGHTP/HELP.ENG/page67.htm (6 of 8)11/2/2004 3:03:36 AM