GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Channel levels, attributes and Dimmers QR
[2] [6] [@ATT] [SHIFT]
[ON]
[2] [6] [@ATT] [SHIFT]
[ON]
AttChan 26 to
maximum frame
[2] [6] [@ATT] [.] [2] [6] [@ATT] [.] AttChan 26 off at zero
[2] [6] [@ATT] [NEXT] [2] [6] [@ATT] [NEXT]
AttChan 26 to next
frame
[2] [6] [@ATT] [LAST] [2] [6] [@ATT] [LAST]
AttChan 26 to
previous frame
[CUE] [1] [@ATT] [*] [CUE] [1] [@ATT] [*]
AttChans in cue 1 off
at zero
[CUE] [1] [@ATT] [2] [CUE] [1] [@ATT] [0] [2]
AttChans used in cue
1 to frame 2
[CUE] [1] [@ATT] [+] [2]
[CUE] [1] [@]
{ATTS ONLY} {FULL}
[CUE] [1] [@ATT] [+] [0]
[2]
[CUE] [1] [@]
{ATTS ONLY} {FULL}
AttChans used in cue
1 to recorded frames
plus 2
AttChans from cue 1
at recorded levels
[1] [@ATT]
[Q ONLY/TRACK] [2]
[1] [@ATT]
[Q ONLY/TRACK] [0] [2]
AttChan 1 to frame 2,
for this cue only (only
valid at cue sheet in
track mode).
Q ONLY/TRACK is
valid in any @ATT
command.
[1] [@ATT] {COL} [2] [1] [@ATT] {COL} [2]
[1] [@ATT] {POSIT} [5] [1] [@ATT] {POSIT} [5]
[1] [@ATT] {IRIS} [3] [1] [@ATT] {IRIS} [3]
[1] [@ATT] {FOCUS} [4] [1] [@ATT] {FOCUS} [4]
[1] [@ATT] {PRISM} [3] [1] [@ATT] {PRISM} [3]
Chan 1 colour to
colour defined in
preset group 2 **
Chan 1 pan and tilt to
position defined in
preset group 5 **
Chan 1 to iris as
defined in preset
group 3 **
Chan 1 to focus as
defined in preset
group 4 **
Chan 1 to prism as
defined in preset
group 3 **
file:///C|/LIGHTP/HELP.ENG/page56.htm (6 of 10)11/2/2004 3:03:30 AM