GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Working with Channel Levels (Cont)
Working with Channel Levels (Cont)
Using Recorded Items in Channel Lists
Intensity and attribute levels for the current selection can be set from cues, groups, effect steps
and submasters by using these recorded items in the channel selection lists.
●
element [@] #[*] selects the channels in the recorded element and sets them to the
levels recorded, scaled by #. element can be a cue, group, effect step or submaster.
For instance, if you include submaster 1 in a list that ends in [@] [8] [*], all channels in
the submaster will be selected along with any other channels specified in the selection,
and channel levels for the submaster channels will be set to 80% of their value in the
submaster.
[SUB] [1] [@] [2] Direct 1 Digit
[SUB] [1] [@] [2] [0] Direct 2 Digit
[SUB] [1] [@] [2] [*] Command Line
Selects the channels in submaster 1 and sets their levels to 20% of their submaster 1
values.
[SUB] [1] [+] [5] [THRU] [9] [@] [2] Direct 1 Digit
[SUB] [1] [+] [5] [THRU] [9] [@] [2] [0] Direct 2 Digit
[SUB] [1] [+] [5] [THRU] [9] [@] [2] [*] Command Line
Selects the channels in submaster 1 plus channels 5 through 9, sets channel 5 through
9 levels to 20%, and sets submaster 1 channel levels to 20% of their submaster 1
values.
●
element [*] [@] # [*] selects the channels in a recorded element and sets them to a
fixed level regardless of the recorded levels.
[SUB] [1] [*] [@] [2] Direct 1 Digit
[SUB] [1] [*] [@] [2] [0] Direct 2 Digit
[SUB] [1] [*] [@] [2] [*] Command Line
Selects the channels in submaster 1 and sets their levels to 20%.
[SUB] [1] [*] [+] [5] [THRU] [9] [@] [2] Direct 1 Digit
[SUB] [1] [*] [+] [5] [THRU] [9] [@] [2] [0] Direct 2 Digit
[SUB] [1] [*] [*] [+] [5] [THRU] [9] [@] [2] [*] Command Line
Selects the channels in submaster 1.Then adds channel 5 through 8 to the selection and
sets them to 20%. Submaster 1 channels remain at their original levels.
ISUB] [1] [*] [+] [5] [THRU] [9] [*] [@] [2] Direct 1 Digit
[SUB] [1] [*] [+] [5] [THRU] [9] [*] [@] [2] [0] Direct 2 Digit
file:///C|/LIGHTP/HELP.ENG/page50.htm (1 of 11)11/2/2004 3:02:45 AM