GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters
0.1 0.1 0ne tenth of a second
1 1 1 second
10 10 10 seconds
59 59 59 seconds
100 1:00 1 minute
125 1:25 1 minute 25 seconds
5959 59:59 59 minutes, 59 seconds
These times are also used by the bump buttons.
The fade times can be different for each submaster page. Changing the page changes the submaster
fader times.
[SUB] # [TIME] # [RECORD] [*] (Direct 1 Digit and Direct 2 Digit)
[RECORD] [SUB] # [TIME] # [*] (Command Line Mode)
records levels on the current display and a fade time into the specified submaster.
[SUB] # [TIME] # [*] All Modes
changes the submaster fade time without changing recorded levels.
[SUB] # [@ATT] [TIME] # [RECORD] [*] (Direct 1 Digit and Direct 2 Digit)
[RECORD] [SUB] # [@ATT] [TIME] # [*] (Command Line Mode)
records levels on the current display and an attribute fade time into the specified
submaster.
[SUB] # [@ATT] [TIME] # [*] (All Modes)
changes the submaster attribute fade time without changing recorded levels.
For specific examples, please see Recording Levels and Properties in Basic Recording.
Fader Properties
Submaster faders have the following properties that can be specified when recording, or edited later:
●
●
●
●
Submaster Functions
Assigning Effects and Macros
External Faders
Submaster Bump Mode
file:///C|/LIGHTP/HELP.ENG/page24.htm (5 of 25)11/2/2004 3:02:50 AM