GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Archive Screen
NUMBER FROM Renumbers the specified range of profiles starting with this number. This lets
you load profiles from other shows without erasing the same numbered profiles in the current
show.
Macros: The recorded macros from the Macros display. A macro range can be specified.
Initially this is from 0 to 2999 and selects all macros.
FIRST: The first macro in the range from 0 to 999. Initially set to 0.
LAST: The last macro in the range from 0 to 999. Initially set to 999.
NUMBER FROM: Renumbers the specified range of macros starting with this number. This
lets you load macros from other shows without erasing the same numbered macros in the
current show.
Fixtures: The fixtures from the Patch display. A fixture range can be specified. Initially this is
from 1 to 99 and selects all fixtures.
FIRST: The first fixture in the range from 1 to 99. Initially set to 1.
LAST: The last fixture in the range from 1 to 99 Initially set to 99.
Auto Mod: Automod pairs from the Auto Mod Screen. You must select the complete Auto Mod
Screen
Setup: The configuration from the Setup Screens.
The Show List Window
The show list appears at the bottom of the Archive display when you press [ARCHIVE] .
To move the highlight to the show list, press {BROWSE FILES}
To move the highlight back to the Archive Selection window, press {BACK}.
file:///C|/LIGHTP/HELP.ENG/page27.htm (3 of 19)11/2/2004 3:03:02 AM