RecTrac 10.1 Reference Guide

RecTrac 10.1 Reference Guide
5 In the Activity/Section field, press the F9 key or right-click from within the field to select the appropriate activity
and section from the picklist.
6 In the Activity Type field, enter or select the activity type.
7 In the Facility Type field, enter or select the facility type.
8 In the Location ID field, enter the location ID.
9 Select whether this link is active or inactive.
10 Click OK.
11 Repeat steps 4–10 for every program that you wish to link to the selected staff member record.
12 Click