RecTrac 10.1 Reference Guide

RecTrac 10.1 Reference Guide
How to Use PCAnywhere 8.0
1 Load PCAnywhere onto your PC.
2 At the Host, add the printer driver in which you would like to print with from the remote PC.
Note: When you add your printer, you will notice a new printer port in which to connect this
printer.
3 Attach it to PCAW.PRN instead of, for example, LPT1.
Note: The pcaw.prn port is not accessible or available until pcanywhere is loaded.
4 Go to the printer properties and click the details tab.
5 Select the spool settings tab. Make sure the spool data format is set to EMF.
6 Go into PCAnywhere at the host computer.
7 Click on file and go to application options.
8 Click on the remote printing tab and make sure that the printer you added is listed. If it is not you can add it at this
time.
9 At the REMOTE site you will need to add the same printer with the same printer driver and make sure that this is
also set to EMF. Print to port LPT1 NOT PCAW.PRN as in the host setup.
10 Parallel port was set to SPP in CMOS.
Change Dot Matrix 17 Pitch Codes
1 Go to File Maintenance - System - Other File Maintenance - Printer/Device File Maintenance. You will proceed to
the Device Maintenance screen.
2 Highlight the dot matrix printer to which you wish to print the League Basketball Score Sheet report.
3 Click Change. You will proceed to the Printer/Device Core Information screen.
4 Click the Device/CTL Codes radio set button at the top of your screen. You will proceed to the Printer/Device
Control Codes screen.
5 In the 17 Pitch field, add the following codes ",27,48" (with no spaces between the commas).
6 Click Done to save your changes and return to the Device Maintenance screen.
7 Click Exit to return to the Main Menu.
IMPORTANT STEP: After printing the report that requires these codes additions, be sure to
delete the newly added codes from the 17 Pitch field. If you do not delete the codes, other
reports will not print properly.
Change Laser Printer's Printer Init Codes
1 Go to File Maintenance - System - Other File Maintenance - Printer/Device File Maintenance. You will proceed to
the Device Maintenance screen.
2 Highlight the laser printer to which you wish to print the League Basketball Score Sheet report.
3 Click Change. You will proceed to the Printer/Device Core Information screen.
4 Click the Device/CTL Codes radio set button at the top of your screen. You will proceed to the Printer/Device
Control Codes screen.
5 In the Print Init field, enter the following codes "27,40,49,48,85" (with no spaces between the commas).
6 Click Done to save your changes and return to the Device Maintenance screen.
7 Click Exit to return to the Main Menu.
Changing the VSIPrint Margins
The following steps assume that:
• You are currently on the VSIPrint preview screen.
• VSIPrint.exe has been successfully loaded on your local machine.
Vermont Systems, Inc. 465 06/09/08