ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Exporting Layouts
‘Modify’ Tab
‘Modify’ Tab
Using the MODIFY tab, particular colors can be replaced with other colors,
omitted or set to overprint.
Replacing spot colors in Page EPS files that have been placed as images
or imported using the OPI function (see page 2-9) is not supported.
Fig. 3-14
‘Modify’ Tab (‘Export Layout’ Dialog)
How to Modify Colors
1. Add colors to the list of modification rules. Use the ADD button to open
the COLOR SELECTION dialog and select a color (see page 10-8).
The colors and modification rules stored in the current export profile
(see page 3-4) are loaded automatically.
In ORIS PDF Tuner, the colors used on the current layout are loaded
additionally. To hide modification rules for other colors, enable the
LIST COLORS USED ON PAGE ONLY option.
Using DELETE and DELETE ALL you can delete a single color or all colors,
respectively, from the list. In ORIS PDF Tuner you can click LOAD
to reload the colors used on the current layout.
2. Click on a color in the list.
3. Use the list underneath SELECTED COLOR to
• omit the color,
• replace a spot color with its CMYK equivalents, or
• replace any process or spot color with a spot color, a process
color or a combination of process colors.
ORIS PDF Tuner Version 4.4.8 User Manual 3-29
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com