ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Transformations
Distorting Objects Using 4 Points
http://www.image2output.com
• Click to open the P1/P4 toolbar, then click on the P1, P2, P3 or
P4 button. Reclick the button to unlock the point. A point is locked if
the corresponding button is displayed as pressed down.
Example: locked, unlocked
Tip:
The P1/P4 toolbar provides an overview of the points which are locked
and displays the coordinates of the four points.
Fig. 19-8
‘P1/P4’ Toolbar
Selecting a Point
There is always an active point which is marked by a frame . Direct
keyboard inputs (see page 29-7) refer to this point, for example. The
point you have clicked or moved last is active by default.
You can select one point after the other by CTRL-clicking (Mac OS) or
right-clicking (Windows) on the layout. This additionally locks the point
that was previously active. Additionally press the SHIFT key to reverse
the order in which points are selected.
Transforming by Moving P1–P4
Take one of the following actions to move one of the four points to another
position, thus rotating, scaling or distorting the object:
• Drag the desired point to the new position.
Hold the SHIFT key pressed down if you want to restrict the movement
to the horizontal or vertical direction.
• Select the point you want, then SHIFT-click on the desired position.
The point will ‘jump’ to this place.
• Select the point you want and enter the new coordinate directly on
the keyboard (press RETURN/ENTER after each input).
The MANUAL ENTRY dialog appears automatically and the values you
enter are displayed there (direct input, see page 29-7).
• Click to open the P1/P4 toolbar, then enter the new coordinates
for the points you want to move.
19-18 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com