ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Creating Tints and Gradients
Selecting Colors
http://www.image2output.com
3. In this dialog you can reduce the density of the spot color. Use the
slider or enter the tonal value (0% to 100%) into the input box. The
CMYK values displayed in the dialog change accordingly.
4. If you have closed the SPOT COLORS dialog (using or ), you can
display it again by clicking the SPOT COLORS button in the COLOR SE-
LECTION dialog.
5. The new color is displayed in the color selection box. If you want to
store it, drag it to a palette box (see above).
6. Click OK to leave the COLOR SELECTION dialog.
Note:
Spot colors can only be output in PostScript, EPS or PDF format. They
are automatically converted to CMYK process colors if other output formats
are used.
Spot Colors Dialog
Use this dialog to load a spot color file and to select spot colors. It lists
each spot color as a color box and specifies its name and the equivalent
CMYK values.
Fig. 10-3
Spot Colors Dialog
10-12 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com