ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Exporting Layouts
‘Screening’ Tab
Disable this option to use the screening values of the output device.
Note:
List of Separations
This list summarizes the screening values specified for each color separation.
To modify these settings, click on a color separation and use the
options underneath the list. In ORIS Works you can use the ADD button
to add spot color separations to the list.
The following color separations are listed automatically:
• CMYK process colors
• Spot colors used for replacing other colors (see page 3-29)
• Spot colors used on the current ORIS PDF Tuner layout
• The setting named ALL OTHERS. It refers to all spot color separations
not listed here (ORIS Works only).
The separations listed here depend on the output color space specified
on the PAGE tab (see page 3-36). Spot colors are not displayed, for example,
if the color space is converted to CMYK, RGB or grayscales.
Screen ruling/Screen angle/Dot shape
These input boxes are only available if you have enabled the USE
SCREENING VALUES option. Use them to specify the following for the color
separation currently selected in the list:
• Screen ruling
• Screen angle
• Dot shape
ORIS PDF Tuner Version 4.4.8 User Manual 3-47
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com