ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Creating ‘Smooth Text’
Smooth Text Adjusting to Closed Outline+1 Line
Top
With this setting the top of the text
touches the baseline, i.e., the text
is placed inside the outline.
Distortion
Use this option to switch between absolute and relative distortion.
Relative
With this setting the text is distorted as a
whole, i.e., the ratio between characters
as well as ascenders and descenders are
maintained.
Absolute
With this setting each character is distorted
separately, i.e., the ratio between the
characters as well as ascenders and descenders
are ignored.
The MODE option was set to CONTOUR in the examples shown here.
Smooth Text Adjusting to Closed Outline+1 Line
If a closed outline and a line are active when you click , the smooth
text options are similar to those for two lines. Using the SETTING
DIRECTion 1 option you can additionally set the text between the line and
the inner side of the outline.
For information on the toolbar options refer to:
Distortion (page 13-6)
Baseline (page 13-6)
Setting Direction 1 (page 13-9)
Trafo Type (page 13-4)
Move (page 13-7)
Points (page 13-8)
Incline (page 13-8)
Stretch (page 13-8)
Move character (page 13-5)
ORIS PDF Tuner Version 4.4.8 User Manual 13-11
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com