ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Editing Linework
Modifying Linework Colors
http://www.image2output.com
5. Using UNDO 1 FILL you can undo the last fill
operation and thus reverse filling step by
step. Using UNDO ALL FILLS you can undo all
operations made after selecting FILL TO.
Filling Restricting Masks
All image and linework manipulations can be restricted by masks (see
page 22-13). In this case modifications do not affect the entire image or
linework, but only the masked areas.
The linework editor also allows you to fill the entire restricting mask:
1. Open the linework (see page 20-6).
2. Create or select a mask (see page 21-1 and 22-5).
3. Press F10 or select IMAGE | RETOUCH.
The STATUS window displays MASK below WORK ON to indicate that a
mask is active (otherwise IMAGE is displayed there).
4. Select FILL IN or FILL TO in the MENU window.
5. Select CMYK COLOR in the MENU window and select the color to be
filled into the mask (see also page 10-8).
6. Select FILL MASK in the MENU window. The mask is filled with the selected
color.
The fill operation can be reversed using function UNDO 1 FILL or UNDO
ALL FILLS in the MENU window.
Selecting Linework Colors
Selecting a linework color is necessary, for example, if you want to modify
all linework areas having this color or if you want to view the color’s
CMYK and transparency values.
There are different ways to select linework colors:
• Click on a linework area having the color you want.
This is only possible in the SELECT and MODIFY modes.
• Position the cursor on the image window and CTRL-click (Mac OS)
or right-click (Windows) repeatedly to select the next color. Additionally
press the SHIFT key to select the colors in reverse order.
26-6 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com