ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Top accent
http://www.image2output.com
Creating Dummy Text
‘Dummy Text Parameters’ Dialog
Accents of upper-case letters in the first inserted line touch the upper line
of the path. The distance between the upper line of the path and the first
baseline is 5/6 of the font size.
Point descender
This adjustment type is identical with TOP POINT. In addition, descenders
do not exceed the lower line of the path. The distance between the lower
line of the path and the last baseline is 1/3 of the font size.
Capital descender
This adjustment is identical with TOP CAPITAL. In addition, descenders do
not exceed the lower line of the path. The distance between the lower
line of the path and the last baseline is 1/3 of the font size.
Note:
We recommend the settings BASELINE or BASELINE DESCENDER as they
allow you to set text areas with identical leading in register even if different
font sizes are used.
Fig. 14-3
Technical Terms for Characters
B
D
A
C
E
F
A Em-square D Ascender
B Body size E Descender
C Cap height F Baseline
Paragraph style
You can use this parameter to specify the name of a QuarkXPress style
sheet defining typesetting parameters for this area. Having transferred
the layout’s typesetting parameter file to QuarkXPress, you can apply
these parameters to the text.
Rotation angle
Use this parameter to specify the rotation angle of the dummy text relative
to the baseline of the path.
ORIS PDF Tuner Version 4.4.8 User Manual 14-5
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com