ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Display and Measure Functions
Zooming In and Out
http://www.image2output.com
• To zoom out, press +– (Mac OS) or CTRL+– (Windows). Alternatively,
use the VIEW | ZOOM OUT function on the pull-down menu.
If these shortkeys or functions are used on a layout, a pixel zoom will be
made only (see page 30-15). The + and – signs refer to the buttons on
the numeric keypad located on the right-hand side of the keyboard.
Method 2
Hold down +SPACEBAR (Mac OS) or CTRL+SPACEBAR (Windows).
The cursor becomes a magnifying glass with a plus sign to indicate
that the zoom in mode is active. While holding these keys pressed down:
• To zoom in, click the center of the area you want to magnify.
• To zoom out, additionally hold down the OPTION (Mac OS) or ALT
(Windows) key and click on the area you want to reduce. The cursor
is now displayed with a minus sign to indicate zoom out mode.
Magnifying Selected Areas
You can enlarged any image or layout area to the window size by drawing
a selection rectangle. There are two methods to do this.
Method 1
1. Enter zoom mode by clicking or selecting VIEW | ZOOM. A check
mark next to the ZOOM function indicates that this mode is active.
The cursor becomes a magnifying glass with a plus sign in its center
to indicate that the zoom in mode is active.
2. Hold down the mouse button and draw a rectangle defining the area
to be magnified.
3. Reclick or reselect VIEW | ZOOM to exit zoom mode.
Method 2
1. Hold down +SPACEBAR (Mac OS) or CTRL+SPACEBAR (Windows).
The cursor becomes a magnifying glass with a plus sign .
2. Additionally hold down the (left) mouse button and draw a rectangle
defining the area to be magnified.
Zooming to a Specific Percentage
1. Press +OPTION+2 (Mac OS) or CTRL+2 (Windows), or select VIEW
| ZOOM %.
2. Enter a percentage value into the input box (between 0.07 and 1600),
then click OK.
30-14 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com