ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Additional Scanlines
http://www.image2output.com
Using Images
Saving Images and Converting Image Format
Enter positive values into the LEFT, RIGHT, TOP and BOTTOM boxes if you
want to enlarge the image by adding white pixel lines. This is required,
for example, if you want to retouch an image beyond its original borders.
If you enter negative values, pixel lines will be subtracted and the image
becomes smaller. If you have drawn a selection rectangle beforehand in
order to copy only an image section, the (negative) number of pixel lines
to be removed is displayed in these boxes.
If all boxes contain the value 0, the entire image will be copied and its
size remains unchanged.
Note:
Adding or removing scanlines has the following side effects:
• Compressed images are converted into uncompressed TIFF format.
• EPS previews are copied without the EPS data, resulting in low-resolution
TIFF images.
• TIFF linework files are converted into grayscale TIFF images.
• If an image is reduced in size, masks which would extend beyond
the edge of the new image are not copied.
Saving Images and Converting Image Format
To overwrite the original image file:
Click or select FILE | SAVE or press +S/CTRL+S.
To save the image as a new file:
Select FILE | SAVE AS.
Or press +SHIFT+S (Mac OS) or CTRL+SHIFT+S (Windows).
Before ORIS PDF Tuner saves the file, you may be prompted to
specify additional options such as the image format or compression
level. See below for more details.
‘TIFF Options’ Dialog
TIFF Compression
If you want to compress the TIFF file and thus reduce the file size,
choose a compression method, otherwise select NONE:
• LZW (lossless)
ORIS PDF Tuner Version 4.4.8 User Manual 20-13
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com