ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Transformations
Specifying Points for Positioning/Distorting
http://www.image2output.com
4. Move the four points to the new position by taking one of the following
actions:
• Drag the desired point to the new position.
Hold the SHIFT key pressed down if you want to restrict the movement
to the horizontal or vertical direction.
• SHIFT-click on the new position. The active point will ‘jump’ to this
place.
The point moved or clicked last is active (selected), which is indicated
by a frame around the point ( inactive, active).
You can select one point after the other by repeatedly CTRL-clicking
(Mac OS) or right-clicking (Windows) on the layout.
• Select the point you want and enter the new coordinate directly
on the keyboard (press RETURN/ENTER after each input).
The MANUAL ENTRY dialog appears automatically and the values
you enter are displayed there (direct input).
• Enter the new coordinates of the four points into the P1/P4 toolbar.
• Select a point and press the arrow keys .
Each keystroke moves the object by one increment of the unit
currently selected in the P1/P4 toolbar. Additionally press the
OPTION (Mac OS) or ALT (Windows) key to move by 0.1 increment
of the current unit.
5. To end the function, reclick the button or select another function
from the TRANSFORMATIONS toolbar.
If you are correcting an image press RETURN/ENTER, or click or
to close the image window.
You can now use the specified points to position and distort the object
(see Positioning Objects Accurately and Distorting Objects Using 4
Points above).
Note:
Make sure you do not specify the same position for two or more points.
This would make positioning and distortion practically impossible.
19-20 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com