ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Exporting Layouts
Using Bleed Pages
http://www.image2output.com
Note:
Defining Page Format and Bleed Margins
Use the ORIS PDF Tuner command FILE | LAYOUT PARAMETERS. It opens
the LAYOUT PARAMETERS dialog (see page 5-8). It allows you to define
the gross page format (with bleed) and the size of the BLEED margins (to
be subtracted from the page format).
A bleed page should not be larger than the actual document. If the bleed
page is larger, the page elements may overlap each other or may be
placed outside the page borders.
Adding Document Information
A bleed page may contain any kind of layers (text, images, etc.) and also
the variables listed below. All variables will be replaced by their actual
values in the output document. The typographic attributes are retained.
The predefined bleed page Bleedpage.ddp contains all of the variables
listed below, but only 12 variables for color separation names.
Variable *) Actual Value Created
$JOB
Document name (without path)
$DATE
Date and time of last modification
$USER
User name
$HEIGHT Page height **)
$WIDTH Page width **)
$PLATE01 Cyan Process color
$PLATE02 Magenta separation names
$PLATE03 Yellow
$PLATE04 Black
$PLATE05 Name of 1. spot color separation
$PLATE06 Name of 2. spot color separation
etc.
…
$PLATE99 Name of 95. spot color separation
*) You can also use @ instead of $.
**) Unit of measurement selectable in EXPORT LAYOUT dialog (see page 3-45).
Select LAYER | TEXT or click to create these variables (see page 12-1).
The variable names must be capitalized, as shown above, and preceded
by the character $ or @. Each PLATE variable must be in a separate text
layer, whereas one or more of the other variables may be in the same
layer.
3-62 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com