ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Retouching
How to Retouch
http://www.image2output.com
In the SOFTEN mode the image outlines of the brushed areas are
smoothened, resulting in a weaker contrast. The higher the current color
density, the weaker the contrast.
Note: If you want to apply these functions to the entire image, use the IMAGE |
FILTER | SHARPNESS function. For more details refer to page 28-1.
‘Color +’/‘Color -’ Modes
In the COLOR + mode the color selected using function 1. COLOR is added
to the image pixels. In the COLOR – mode the color selected with function
1. COLOR is subtracted from the image pixels.
Note:
These modes always affect the original image or the state that was
saved temporarily. Therefore, if you have already made modifications,
first save them temporarily by selecting FIX CHANGES in the MENU window
before adding or subtracting colors. See also page 23-12.
‘(Load) Color Trafo’/‘(Load) Gradation’ Modes
It is possible to make color transformations and gradation changes to the
image areas on which you are brushing. There are two methods:
Selecting Stored Settings
In the RETOUCH dialog, select the LOAD COLOR TRAFO or LOAD GRADA-
TION mode (see page 23-4), respectively. A dialog appears allowing you
to select a stored transformation or gradation setting. The stored settings
are now applied to the image areas you are retouching.
Use the IMAGE | COLOR GRADATION or COLOR TRANSFORMATION function
to create and store such settings.
Applying Last Gradation or Color Transformation
If you have modified an image using the IMAGE | COLOR GRADATION or
COLOR TRANSFORMATION function in the current ORIS PDF Tuner session,
the COLOR TRAFO or GRADATION modes, respectively, are available.
Select these modes to apply the same modifications as before, but now
only to the image areas you are retouching, not to the entire image.
These modes are only available if the image mode (RGB, CMYK) corresponds
with the mode of the image that was modified beforehand using
IMAGE | COLOR GRADATION or COLOR TRANSFORMATION. If you have
changed the gradation of an RGB image, for example, and then open a
CMYK image, the retouching mode GRADATION is not available.
23-6 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com