ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Inserting Images Into Layout
Placing Foreground Images
http://www.image2output.com
Note:
EPS clipping paths are used automatically and need not be selected.
If you select an ORIS PDF Tuner mask for an EPS image with a clipping
path, the cut-out will consist of the image area shared by both
masks.
5. Press +OPTION+E (Mac OS) CTRL+ALT+E (Windows), or select
COMPOSE | FOREGROUND. The cut-out is inserted into the current
layout and the TRANSFORMATIONS toolbar appears.
6. You can move the image with the mouse button pressed down, resize
and rotate it using the handles and transform it in many different ways
with the toolbar. For more details refer to Transformations (page
19-1).
Click to define transparency, soft edges or trapping (see
page 17-1 and 18-1).
Correcting Cut-outs
1. Activate the cut-out layer (see page 16-1).
You can only correct one layer at a time.
2. Click , or press +M (Mac OS) or CTRL+M (Windows).
Alternatively, select CORRECT on the EDIT menu or MENU window.
The TRANSFORMATIONS toolbar appears.
3. You can move the object with the mouse button pressed down, resize
and rotate it using the handles and transform it in many different ways
with the toolbar. For more details refer to Transformations (page
19-1).
4. Click to correct transparency, soft edges or trapping (see
page 17-1 and 18-1).
Alternative Method
To modify a cut-out, you can also use TRANSFORM in the MENU window
of the active layer or double-click the layer. However, this function does
not start the layer’s creation function. Some of the consequences are:
• The scaling factor and the angles displayed in the
TRANSFORMATIONS toolbar do not take into account all of the transformations
made after the image was inserted into the layout. They
always refer to the last use of the TRANSFORM function.
• Clicking the button does not resize the cut-out according to the
EXPECTED PRODUCTION RESOLUTION (defined using FILE | LAYOUT
PARAMETERS, see page 5-9). It only restores the size the cut-out had
before the TRANSFORM function was selected.
11-10 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com