ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Transformations
Scaling, Rotating and Moving in One Function
Fig. 19-5
Distorting Perspectively (Examples)
Distort X
Distort Y
1. Click if you want to define the location of the rotation axis. By default,
the axis passes through the object’s center. See Defining Fixed
Point (page 19-14).
2. Click into the input box labeled (DISTORT X) or (DISTORT Y).
3. Hold CTRL and the mouse button (Mac OS) or the right mouse button
(Windows) pressed down and move the mouse upward or downward.
Alternatively, enter the angle into the input box (direct input).
You can also use the arrow keys:
1. Press RETURN/ENTER. Alternatively, CTRL-click (Mac OS) or rightclick
(Windows) on the layout. This removes the focus from the
toolbar.
2. Use and (DISTORT X) or and (DISTORT Y). It does not
matter whether the cursor is inside the or input box.
Each keystroke changes the angle by 10°. Additionally press the
OPTION (Mac OS) or ALT (Windows) key to change it by 1°.
Note:
Avoid angles greater than 89° and lower than –89° as they cause the object
to turn over completely.
Perspective distortions are not supported for Page EPS files positioned
as images on a layout (see page 33-4).
Scaling, Rotating and Moving in One Function
There is a function that allows you to easily move, rotate and scale proportionally
without having to select a new function each time.
1. Click if you want to define the point that will remain fixed during
scaling or rotation. See Defining Fixed Point (page 19-14).
2. Click on the button.
19-12 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com