ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Using Guides
About Snapping
http://www.image2output.com
About Snapping
The current selection is displayed in the STATUS window below TYPE.
To modify the default colors, use the FILE | SYSTEM SETUP | DISPLAY
COLORS command (see page 31-2).
Using the commands on the VIEW menu (see page 30-18) you can hide
and display all guides of a particular type. This affects all open layouts.
You can also press F7 to hide and display all guides of the type GUIDES.
Snap Area
All guides have a magnetic snap area. The cursor snaps to the guide
when moved into this area. The snap area is defined as follows:
Fig. 6-1
Snap Area of Guides
d
Vertical
guide
d
Circular
guide
d
Guide
point
d
Guide
Snap area border
Snap area size (default: 1.5 mm)
When creating a guide, the snap area defaults to the value specified using
the GUIDES SNAP AREA option in the LAYOUT PARAMETERS dialog (see
page 5-7). Select FILE | LAYOUT PARAMETERS to open this dialog. Initially,
the snap area is set to 1.5 mm. It can be set individually for every guide.
How Snapping is Indicated
When the cursor has snapped to a guide, the type of guide is indicated
by a letter. This letter appears in the COLOR window (see page 30-21) on
Mac OS and at the right end of the status bar under Windows. There are
the following indicators:
X horizontal guide I2 Cursor has snapped to the
Y vertical guide 2C intersection of two or more
I inclined guide
inclined or circular guides,
C circular guide
respectively.
P point
6-2 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com