ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Inserting Images Into Layout
Placing Background Images
http://www.image2output.com
For more details refer to Transformations (page 19-1).
Changing Outlines of Background Image Layers
With this correction method you modify the path that clips the image and
thus the layer outline. The actual image, i.e. the layer contents, remains
unchanged. The following figure shows an example.
This method is only available if the image was inserted into a closed
path.
Fig. 11-11
Modifying the Outline of a Background Image
This background image was inserted into a rectangle. The corners of
this rectangle are then rounded. The image itself remains unchanged
in position, shape and size, but it is now clipped to a larger extent.
How to Change the Outline of Background Images
Note:
1. Activate the layer (see page 16-1).
2. Select LAYER PATH in the MENU window.
This starts the function that was used to create the path in which the
image was inserted.
3. You can now modify the path in the same way in which you have created
it (e.g. by enlarging a circle radius, changing rectangle corners,
etc.). The way to do this differs according to the path.
For more details refer to
• Creating Standard Paths (page 7-1)
• Correcting by Using Creation Function (page 8-4)
4. There are additional options in the MENU window:
• Select PATH EDITOR to start the Path Editor, a useful tool for
modifying paths creatively (see page 9-1).
• Select PATH to open the TRANSFORMATIONS toolbar, allowing you
to move, resize or rotate the entire path, and many more transformations.
For more details refer to page 19-1.
This correction method is not available if the image was inserted into a
pixel mask or layer.
11-8 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com