ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Creating Text and Headlines
Creating Text Runarounds
http://www.image2output.com
4. You can step through the four parameters in order to correct them.
Click to select the next parameter. SHIFT-CTRL-click (Mac OS) or
SHIFT-right-click (Windows) to select the previous parameter. The
currently parameter is displayed in the STATUS window.
5. Click , or to open the COLOR SELECTION dialog (see also
page 10-1), then fill the box with a color. For more details refer to
Creating Tints (page 10-1) and Creating Gradients (page 10-2).
Click if you want to insert an image (see page 11-1).
6. If the text is hidden by the color or image, Select INSERT SELECTION
on the MENU window, then SHIFT-CTRL-click (Mac OS) or SHIFT-rightclick
(Windows). See also Changing Stacking Order (page 16-15).
Creating Text Runarounds
Any layer that overlaps a text layer can be set to displace the text. Thus
you can easily create runarounds. The distance between text and displacing
layer can be defined by the user. You can also prevent text layers
from being displaced by other layers. Both features are also available for
dummy text (see page 14-1).
How to Enable Text Displacement
1. Activate the layer which is to displace the text (see page 16-1).
You can only assign the displacement attribute to one layer at a time.
The displacing layer cannot be dummy text or text set into a path.
2. Select DISPLACE in the MENU window. The TEXT DISPLACEMENT PA-
RAMETERS dialog appears (see Fig. 12-8).
3. Define the parameters you want, then select OK (see below).
Fig. 12-8
’‘Text Displacement Parameters’ Dialog
12-24 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com