ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Creating Dummy Text
Modifying Dummy Text
http://www.image2output.com
Number of lines
Use this parameter to specify the number of text lines to be set into the
path. The default setting is 0, which means that the path will be filled
completely.
Profile
Store
To save the current dummy text parameters to your hard disk, click
STORE and type a name for the parameter set (= profile).
Load
To load a saved parameter set, click LOAD and select the parameter set
you want from the list.
Delete
To delete a saved parameter set, click DELETE and select the parameter
set you want from the list.
Default
Click the DEFAULT button to restore the original parameter values displayed
when the dialog was opened.
Modifying Dummy Text
Changing Typography and Area Name
1. Activate the dummy text layer (see page 16-1).
2. Click , or press +M (Mac OS) or CTRL+M (Windows).
Alternatively, select CORRECT on the EDIT menu or MENU window.
3. Modify the parameters. Refer to page 14-2 for more details.
4. Select OK to leave the dialog. The dummy text is recreated using the
new parameters.
14-6 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com